Extron electronic MSG0808 Operation, cont’d, Selecting the switching level audio versions only

Page 22

Operation, cont’d

To increase or decrease the audio volume of the selected output (audio versions only):

Press the Volume increment () or decrement () buttons until the desired sound level is reached. To increase/decrease input volume levels, press and hold the input button while adjusting the volume levels.

To mute/un-mute the audio (audio versions only):

To mute the last selected audio output, press the Mute button. The LED over the Mute button will light to indicate that Mute is active and the audio will be muted. To un-mute the audio, press the Mute button again. The LED will go out and the audio will be un-muted.

Selecting the switching level (audio versions only)

The switcher has three different switching levels, selectable from the front panel; level 1 is audio follows video, level 2 is video with no audio, and level 3 is audio only. The currently selected level is indicated on the front panel by the video and audio LEDs adjacent to the Level Select button. If both the video and audio LEDs are lit, the switcher is set for level 1 switching. If only the video LED is lit, the switcher is set for level 2 switching. If only the audio LED is lit, the switcher is set for level 3 switching.

Switching only affects the level(s) indicated. If level 2 is indicated, only the video will be switched. If level 3 is indicated, only the audio will be switched.

To toggle between switching levels, press Level Select button repeatedly until the desired level is indicated.

Reset to factory default

To restore input/output configurations, volume levels, and RS-232 settings to factory default, press the Input 1 and Input 5 buttons at the same time.

3-4 MSG Matrix Switchers • Operation

Image 22

Contents Matrix Switchers MSG0804 and MSG0808Consignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen DeutschQuick Start MSG0804 and MSG0808 Connecting the MSG0808Rack mounting the MSG0808 Quick Start MSG0804 and MSG0808, cont’d OperationTable of Contents Table of Contents, cont’d One IntroductionMSG Matrix Switchers Introduction About the MSG Matrix SwitchersMSG Matrix Switcher Features IntroductionFlexible Control Options This page intentionally left blank Installation TwoMSG Matrix Switchers Installation InstallationMounting the Switcher Tabletop useRear Panel Connectors Video Inputs Video OutputsInstallation, cont’d RS-485 Half Duplex ConnectionConnecting the MSG0804 and MSG0808 MSG0808 installation exampleUnbalanced audio Installation, cont’dAudio input and output Balanced audioVertical Interval Switching Connecting the external sync signalThis page intentionally left blank Three OperationMSG Matrix Switchers Operation Front Panel FeaturesOperation Front Panel Operation Connecting inputs with outputsPreset configurations Miscellaneous front panel functionsReset to factory default Selecting the switching level audio versions onlyOperation, cont’d Four Windows-based Control ProgramUsing the Software Installing the Windows-based ICS100 Control SoftwareWindows-based Control Program, Cont’d Using the control panel ICS100 Interface screen MSG switcher controls optionsDefining input icons and labels Setting volume levelsAdjusting output volume levels Creating a new patchAdjusting input volume levels ICS100 Set Output Volume windowSetting and using presets Opening the Options menuUsing Terminal Comm VIS EnableEnable Response Resetting the unitThis page intentionally left blank Remote Control FiveDip Switch Settings Remote ControlMSG Matrix Switchers Remote Control Addressing commands Host-to-MSG Matrix Switcher CommunicationsUsing the command table Set-up commands Remote Control, cont’dCommand Table Command DescriptionSwitching levels audio models only Switching commandsVolume commands Blank outputMute all outputs Stop volume ramp Enabling remote control of the switcher over a network Remote Control from a NetworkPreset commands Change input volume level globalInstructions for configuring the client remote PC ICS100 Serial Port Server windowStopping communication Adjusting response timeAdjusting the response time Stopping communications from the server PCCTL120-2 IR Remote Control Press this button firstRemote Control, cont’d Specifications AAppendixVideo input SpecificationsVideo Video outputAudio audio models only MSG Matrix Switchers Specifications A-3Sync Audio inputMSG Matrix Switchers Specifications Specifications MSG0804 and MSG0808Control/remote switcher GeneralBAppendix Reference InformationReference Information To update the firmwareUpdating the Firmware Installing the custom nameplates Installing Custom Engraved NameplatesMSG Matrix Switchers Reference Information Reference Information, cont’d MSG Matrix Switcher part numbersOptional accessories Part NumbersPre-cut cables Plenum Seventeen Conductor Installation CableAssorted connectors BNC connectors Extron Part BNC-4 Mini HR CableThis page intentionally left blank FCC Class a Notice Extron’s Warranty Extron Electronics, USA