Extron electronic MSG0808, MSG0804 manual Setting and using presets, Opening the Options menu

Windows-based Control Program, Cont’d

Setting and using presets

The ICS100 Control Program can be used to create, view, save, recall, label, and clear presets for the MSG matrix switcher. Up to 32 presets can be set using this program. For tasks in addition to those detailed below, access the Help system from the Interface screen.

Viewing existing presets

Select Presets from the Controls drop-down menu. The Preset Panel window opens. Existing presets are labeled and shown on this screen.

Creating a preset

1.Set up the I/O configuration for the preset in the Control Panel.

2.Select Presets from the Controls drop-down menu. The Presets window opens.

Figure 4-6 — ICS100 Presets window

3.Right-click on the number you want to assign to the preset, then click the Save button. The preset is saved to the selected number.

4.Close the Presets window.

Recalling a preset

1.Select Presets from the Controls drop-down menu. The Presets window opens.

2.Click on the number of the preset you want to recall, then press the Recall button. The preset configuration is activated.

3.Close the Presets window.

Opening the Options menu

Click the Controls option on the menu bar. A drop-down menu listing the various options available to your switcher is displayed.

Enabling/disabling front panel control

The current state of front panel control is indicated by the presence or absence of a check mark next to Front Panel Enable on the Options menu. If a check mark appears, front panel controls are enabled. If a check mark does not appear, front panel controls are disabled. To toggle front panel controls on or off, click Front Panel Enable with your mouse pointer.

4-6 MSG Matrix Switchers • Windows-based Control Program