Extron electronic manual Specifications MSG0804 and MSG0808, Control/remote switcher, General

Page 46

Specifications — MSG0804 and MSG0808

MSG0808-4,
MSG0808HR-4	8 stereo, balanced/unbalanced, line level
Connectors
MSG0804-4,
MSG0804HR-4	(4) 3.8 mm captive screw connectors, 5 pole
MSG0808-4,
MSG0808HR-4	(8) 3.8 mm captive screw connectors, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.4dB channel to channel
Maximum level (Hi-Z)	>+12dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm)	>+20dBm, balanced or unbalanced at stated %THD+N

0dBu = 0.775 volts (RMS).

Control/remote — switcher

Serial control ports	RS-232, RS-422, RS-485 on a 3.8 mm captive screw connector
Baud rate and protocol	1200/2400/4800/ 9600/19200/38400 (default 8-bit, 1 stop bit, no parity, no
	flow control, 9600 baud)
Serial control pin configurations	RS-232 — 2 = TX, 3 = RX, 5 = Gnd
	RS-422/RS-485 — 2 = TX+, 6 = TX-, 3 = RX+, 7 = RX-, 1 and 5 = Gnd
Program control	ICS100 Control Software

General

Power	100VAC to 240VAC, 50/60 Hz, 25 watts, internal, autoswitchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
	Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount	Yes, with included IN9084B rack mount kit
Enclosure type	Metal
Enclosure dimensions	5.2" H x 17" W x 11.4" D (3U high, full rack width)
	13.3 cm H x 43.3 cm W x 28.8 cm D
	(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight	12.25 lbs (5.6 kg)
Shipping weight	15 lbs (6.8 kg)
	DIM weight	26 lbs
Vibration	ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings	ETL (UL1950)
Compliances	CE, FCC Class A
MTBF	30,000 hours
Warranty	3 years parts and labor

Specifications are subject to change without notice.

A-4 MSG Matrix Switchers • Specifications

Image 46

Contents Matrix Switchers MSG0804 and MSG0808Consignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen DeutschQuick Start MSG0804 and MSG0808 Connecting the MSG0808Rack mounting the MSG0808 Quick Start MSG0804 and MSG0808, cont’d OperationTable of Contents Table of Contents, cont’d One IntroductionMSG Matrix Switchers Introduction About the MSG Matrix SwitchersMSG Matrix Switcher Features IntroductionFlexible Control Options This page intentionally left blank Installation TwoMSG Matrix Switchers Installation InstallationMounting the Switcher Tabletop useRear Panel Connectors Video Inputs Video OutputsInstallation, cont’d RS-485 Half Duplex ConnectionConnecting the MSG0804 and MSG0808 MSG0808 installation exampleUnbalanced audio Installation, cont’dAudio input and output Balanced audioVertical Interval Switching Connecting the external sync signalThis page intentionally left blank Three OperationMSG Matrix Switchers Operation Front Panel FeaturesOperation Front Panel Operation Connecting inputs with outputsPreset configurations Miscellaneous front panel functionsReset to factory default Selecting the switching level audio versions onlyOperation, cont’d Four Windows-based Control ProgramUsing the Software Installing the Windows-based ICS100 Control SoftwareWindows-based Control Program, Cont’d Using the control panel ICS100 Interface screen MSG switcher controls optionsDefining input icons and labels Setting volume levelsAdjusting output volume levels Creating a new patchAdjusting input volume levels ICS100 Set Output Volume windowSetting and using presets Opening the Options menuUsing Terminal Comm VIS EnableEnable Response Resetting the unitThis page intentionally left blank Remote Control FiveDip Switch Settings Remote ControlMSG Matrix Switchers Remote Control Addressing commands Host-to-MSG Matrix Switcher CommunicationsUsing the command table Set-up commands Remote Control, cont’dCommand Table Command DescriptionSwitching levels audio models only Switching commandsVolume commands Blank outputMute all outputs Stop volume ramp Enabling remote control of the switcher over a network Remote Control from a NetworkPreset commands Change input volume level globalInstructions for configuring the client remote PC ICS100 Serial Port Server windowStopping communication Adjusting response timeAdjusting the response time Stopping communications from the server PCCTL120-2 IR Remote Control Press this button firstRemote Control, cont’d Specifications AAppendixVideo input SpecificationsVideo Video outputAudio audio models only MSG Matrix Switchers Specifications A-3Sync Audio inputMSG Matrix Switchers Specifications Specifications MSG0804 and MSG0808Control/remote switcher GeneralBAppendix Reference InformationReference Information To update the firmwareUpdating the Firmware Installing the custom nameplates Installing Custom Engraved NameplatesMSG Matrix Switchers Reference Information Reference Information, cont’d MSG Matrix Switcher part numbersOptional accessories Part NumbersPre-cut cables Plenum Seventeen Conductor Installation CableAssorted connectors BNC connectors Extron Part BNC-4 Mini HR CableThis page intentionally left blank FCC Class a Notice Extron’s Warranty Extron Electronics, USA