Operation, cont’d
Press and release the Output 1 button. The LED blinks to indicate that the selected RGBHV input will be tied to this output.
The Enter LED blinks to indicate the need to confirm the change.
1 2 3 4 5 6 ENTER PRESET OUTPUTS
Figure 3-13 — Select the output
5. Press and release the Enter button (figure 3-14).
Press the Enter button to confirm the configuration change.
The Enter LED and all input LEDs and output LEDs return to the unlit state.
ENTER
Figure 3-14 — Press the Enter button
The current configuration (figure
•Input 5 video tied to output 1, output 3, output 4, and output 8
•Input 5 audio tied to output 3, output 4, and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
5
1
3
4 Output
8
Video Audio
Figure 3-15 — Example 2, final configuration
Example 3: Removing a tie from a set of video and audio ties
The following steps show an example in which an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action.