Extron electronic HSA 822 user manual Packaging for Shipment, Reference Information, cont’d

Page 24

Reference Information, cont’d

Cut-Out Template for Extron's

HSA 822

User Access (Connectors and AAP Openings)

8.470" (21.51 cm)

6.220" (15.80 cm)

 

 

 

 

7.900+ 0.0325"

 

 

 

 

(20.07 +0.083 cm)

 

 

 

 

SURFACE CUT-OUT

 

 

 

 

AREA = 7.900 +0.0325"

8.750"

 

 

 

 

(20.07 + 0.083 cm) x

(22.23 cm)

 

 

 

 

 

8.250 + 0.0325"

6.500"

 

(20.96 + 0.083 cm)

 

(16.51 cm)

 

 

 

+ 0.0325"

 

8.250

 

(20.96

+0.083 cm)

 

 

 

 

 

 

 

 

0.5"

 

 

 

(1.3 cm)

Cut surface material

Tilting Plate Top Panel

Cut-Out Radius:

out along this line.

 

 

0.25"

 

 

 

 

 

 

(0.6 cm)

User Access (Connectors and AAP Openings)

TEMPLATE IS NOT FULL SIZE.

Figure A-3 — HSA 822 cut-out template

HSA 822 Hideaway® Enclosure

AppendixBB

Packaging for Shipment

A-6 HSA 822 Hideaway® Enclosure • Reference Information

Image 24
Contents Hideaway Surface Access Enclosure HSAPrecautions Extron’s WarrantyPage Table of Contents Table of Contents, cont’d IntroductionHSA 822 Hideaway Enclosure Introduction About the HSA 822 Hideaway EnclosureInstallation FeaturesIntroduction, cont’d Installation Installation OverviewPreparing the Routing Template Other installation surface. Mark the location Place the routing template assembly on the table, centeredOnce the template assembly is positioned properly, secure Assembly to the table with C-clamps figureInstallation, cont’d Clean the HSA. Strong solvents will ruin someDo not use isopropyl alcohol or other solvents to FinishesInstallation, cont’d Cabling and Installing the AAPs Installation, cont’d Cabling the Enclosure Bottom panel featuresAn RJ-11 telephone plug can be connected to the RJ-45 jack Installation, cont’d Routing the AAP Cables BezelsMaintenance and Modifications ThreeMaintenance and Modifications Replacing an AAPMaintenance and Modifications, cont’d Replacing the Bezels Removing and Replacing the EnclosureMaintenance and Modifications, cont’d Replacing the Gas Lift Insert the shaft end of the replacement gas lift through Reconnect the interior AC power cablesWith the top panel bracket detached from the lifting Platform, the bracket will be floppy atop the gas liftAdjusting the height of the top surface Height adjustment locking screw slotsAdjusting the top surface level Reference InformationSpecifications Reference InformationPart Numbers GeneralTemplate, Replacement Parts, and Accessories Interface AccessoriesTop Plate Dimensions Reference Information, cont’d Included PartsPackaging for Shipment Reference Information, cont’dPackaging for Shipment Figure B-1 HSA 822 return kitFigure B-3 Installing protective strips Packaging for Shipment, Cont’dFigure B-6 Placing the HSA in the shipping carton Packaging for Shipment, Cont’d
Related manuals
Manual 23 pages 6.66 Kb