Extron electronic HSA 822 Installation, cont’d, Do not use isopropyl alcohol or other solvents to

Installation, cont’d

6.	Remove the plastic strips that protect the flanged edges of
	the top of the surface enclosure. If a sticky residue
	remains, remove it with an appropriate metal cleaning
	product.
		Do not use isopropyl alcohol or other solvents to
	CAUTION
		clean the HSA. Strong solvents will ruin some
		finishes.
7.	Carefully lower the HSA enclosure into the hole to test the
	fit. If necessary, remove the enclosure and use a file or
	rasp to enlarge or smooth the edges of the opening.
8.	From the underside of the table, bolt the clamshell to the
	enclosure with two bolts of optimum length (included)
	(figure 2-3).
9.	Peel any remaining protective coating from the enclosure.

Power Cord

RJ-45 Connectors

HSA 822

Mounting

Surface

AAP Cables

Clamshell

Flat Washer

Full Thread

Mounting Bolts

Figure 2-3 — Mounting the HSA 822 enclosure

2-6 HSA 822 Hideaway® Enclosure • Installation HSA 822 Hideaway® Enclosure • Installation 2-7