Gigabyte GS-R12T4H2-RH manual TurboMode, CPU C State, Osacpi C3 Report, CPU C6 Report

	BIOS Setup
SW_ALL	In SW_ALL mode, the OS Power Manager is responsible for coordinating
	the P-state among loical processors with dependencies and must initiate the
	transition on all of those Logical Processors.
SW_ANY	In SW_ANY mode, the OS Power Manager is responsible for corrdinating
	the P-state among logical processors with dependencies and may initiate
	the transition on any of those Logical Processors .
TurboMode

Turbo Mode automatically allows processor cores to run faster than marked frequency if the physical processor is operating below power, temperature and current specification limits. Turbo Mode can be engaged with SMT (Simultanceous Multi Threading) enabled and 1 to 4 cores active and is not limited to only a single core or logical processor.

Enabled	Turbo Mode. (Default setting)
Disabled	Disable Turbo Mode.
T State
Enabled	Enable CPU T-State. (Default setting)
Disabled	Disable T-State.
CPU C State
Enabled	Enable ACPI C-State (C0, C1/C1E, C3, C6 and C7). (Default setting)
Disabled	Disable C-State.
CPUC1E
Enabled	Enable CPU C1E. (Default setting)
Disabled	Disable CPU C1E.
OSACPI C3 Report
C3	Desire state for the Nehalem core C3 state include in the CST as ACPI C3
	state. (Default setting)
C2	Desire state for the Nehalem core C2 state include in the CST as ACPI C2
	state.
Disabled	Disable OS ACPI C3 Report.
CPU C6 Report
Enabled	Desire state for the Nehalem core C6 state include in the CST as ACPI C3

5 2