ATTO Technology 2200R/D, 3200R, 2100R manual 2200R/D Side view with hole dimensions

Page 21

ATTO Technology, Inc.

ATTO FibreBridge Installation & Operation Manual

The physical dimensions of the FibreBridge 2200R/D are 16.725" W x 10"D x 1.72"H

(424.5mm W x 253.8mm D x 43.7mm H)

Mounting

The FibreBridge 2200R/D was designed with all of the cable connections and the power switch on one side, while the LED indicators are on the opposite side. When mounting this unit into a rack, the "L"- brackets can be installed so that either the LED side of the bridge or the connector side can be facing front. The mounting holes on the "L"-bracket fit a standard 19” rack, using a centered 1.25” (31.7mm) hole pattern.

Figure 5.3 "L" Mounting Bracket

Figure 5.4 2200R/D Side view with hole dimensions

ATTO Technology, Inc.

- 16 -

Image 21

Contents Atto Technology, Inc Atto FibreBridge Atto Technology, Inc Atto Fibrebridge Benefits and Features Updating the Firmware Within the Fibrebridge Atto Technology, Inc Introduction FibreBridge Product Module DescriptionFC Rack System Product Description References Fibre Channel TechnologyAtto FibreBridge Benefits and Features Fibre Channel Switch SupportAtto FibreChain FibreBridge Feature Comparison FeatureAtto FC Rack Enclosure and Power Modules Physical DimensionsMounting Environmental Cooling AirflowCooling Fans Power Module Internal Power DistributionLED Indicator IEC Power Receptacle and SwitchInstallation and Removal Atto FC Rack System Installation Considerations Atto FibreBridge Product Module Integration Power RequirementsAtto FibreBridge Power Connector Scsi Ports Fibre Channel PortsLED Indicators FibreChain Ports 2100 model onlyAtto FibreChain Port LEDs 2100R model only Serial Port Ethernet PortFibreBridge2200R/D Front View FibreBridge 2200R/D2200R/D Side view with hole dimensions Cooling and Airflow Power SupplyScsi Fibre Channel PortLED Indicators on FibreBridge 2200R/D Quick Installation Instructions Cabling a FibreBridgeScsi Cabling Scsi Termination Typical Scsi CablesConnector Laser Type ConnectorFibre Channel Cabling Cable LengthGbic Module and Gbic Guide System Gbic Installation InstructionsGbic Removal Instructions Media Interface Adapters MIAPin # Name MIA Installation MIA DB9 ConnectorAtto BridgeTools Graphical Interface Configuration Program FibreBridge ServicesAccessing the Atto FibreBridge over the RS-232 interface Monitoring and Managing the Atto FibreBridgeSetting up the IP Address using the RS-232 port Accessing the Atto FibreBridge over the Ethernet PortAccessing through FTP Atto Technology, Inc What is Serverless Backup? Serverless Backup SupportEnabling Serverless Backup on the FibreBridge General Operation of Serverless BackupTarget Descriptors Segment DescriptorsFlashing the FibreBridge Updating the Firmware Within the FibreBridgeIdentifying the FibreBridge Addressing Scsi DevicesIdentifying the Scsi Devices Connected to the FibreBridge Default Address Translation Addressing Devices Connected to the FibreBridge Appendix a Fibre Channel to Scsi Address MappingScsi Address Components Fibre Channel AddressingFibre Channel World Wide Name WWN Arbitrated Loop Port Address AlpaBit Scsi Architecture Model SAM-2 Logical Unit AddressingPeripheral Device Addressing Method Bit Number Address Address Method Specific DefinitionFibreBridge Default Mode Virtual Device Addressing MethodLogical Unit Addressing Method SCSI-3 Inquiry Command SCSI-3 Command Changes for Hierarchical Addressing SupportFibre Channel to Scsi Address Mapping Address DescriptorsSCSI-3 Report LUNs Command What to Expect When Setting Device IDsSetting the ID of the FibreBridge Addressing Connected Scsi DevicesAtto Technology, Inc Scsi Device ID Translated LUN as it appears to the Host Configuration for Consecutive IDsAtto Technology, Inc FCC Standards Appendix B Radio and Television InterferenceCanadian Standards European StandardsFurther results of FCC Testing Maximum Height = 1.582 4.015 cm Maximum Height = 1.272 3.228 cm Figure C-3 Atto FibreBridge 3200R Connector Layout Appendix D Fibre Channel Resources Field Replacement Units FRU Appendix E Fibre Channel AccessoriesMIAs Cables/CopperCables/Optical Cables/FibreChainCables/SCSI Appendix F How to Contact Atto Technology, Inc