ATTO Technology, Inc. | ATTO FibreBridge Installation & Operation Manual |
Default Address Translation
The default Address Translation method should be sufficient for most configurations.
For devices connected to FibreBridge SCSI Bus 1: |
|
|
|
|
| |||
SCSI Target ID | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Translated into Fibre LUN | 0 | 2 | 4 | 6 | 8 | 10 | 12 | 14 |
For devices connected to FibreBridge SCSI Bus 2: |
|
|
|
|
| |||
SCSI Target ID | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Translated into Fibre LUN | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 |
If this mapping is not acceptable, the translation can be modified using FibreBridge Services. Refer to the BridgeTools manual and Appendix A for details.
ATTO Technology, Inc.
- 35 -