ATTO Technology, Inc. | ATTO FibreBridge Installation & Operation Manual |
The FibreBridge modules do not come standard with GBIC modules. They must be ordered separately.
GBIC Module and GBIC Guide System
Figures 6.3 and 6.4 depict a typical GBIC and GBIC guide system. GBICs may be removed and replaced with the power on.
Figure 6.3 GBIC Module
Figure 6.4 GBIC Guide System
GBIC Installation Instructions
1.Orient the GBIC as shown in Figure 6.5. The keyway is ON THE BOTTOM for the port insertion.
2.Slide the GBIC into the port opening (the
3.Push the GBIC in until the GBIC latches snap into place.
4.Cable the port.
ATTO Technology, Inc.
- 23 -