Basic Operation, Buttons | Tripp Lite UL2601-1 instruction

Basic Operation

Buttons

Use the UPS/STANDBY button to do three things:

Switch your UPS’s Operating Mode: While your UPS is plugged into a live AC outlet, press the UPS/STANDBY button and hold it until you hear a beep (about 2 seconds) to toggle between the following operating modes. Choose your UPS’s operating mode based on the regional guidelines in Step 3 of the Quick Installation section.

•UPS Mode: ENABLES battery backup. UPS Conditions: While receiving adequate utility line power, the UPS supplies power to its AC receptacles and charges its batteries; its “ ” indicator light will be lit. If the utility line power fails or becomes inadequate, the UPS will supply inverted AC power to its receptacles if its batteries are sufficiently charged. Setting Advantages: Provides battery backup during blackouts or brownouts.

•STANDBY Mode: DISABLES battery backup. UPS Conditions: While receiving adequate utility line power, the UPS supplies power to its AC receptacles and charges its batteries; the “ ” indicator light will be flashing. Setting Advantages: Continues to charge the battery when power is present while turning OFF the inverter to pre- vent battery depletion during power outages when equipment is not in use.

Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing that the UPS battery is charged. To “cold start” your UPS, press and hold the UPS/STANDBY button until you hear a beep (about 2 sec- onds), then release it. The “ ” indicator light will illuminate and AC power inverted from stored battery power will be provided at the UPS receptacles.

Shut Down Your UPS: Press and hold the UPS/STANDBY button when AC line power is absent (i.e. during a blackout, or when the UPS is unplugged) to deactivate your UPS.

Use the MUTE/TEST button to do two things:

Silence the UPS On-Battery Alarm: Press and hold this button to silence the UPS On-Battery alarm, a series of short beeps followed by a brief pause that is activated when the UPS is providing AC power from battery. Note: When the battery is nearly depleted, the Low Battery alarm—a continuous beep that cannot be silenced—will alert you to immediately shut down connected equipment.

Run a Self-Test:Your UPS performs a self-test whenever it is first plugged in. To have it run a self-test at another time, leave your connected equipment on. With your UPS plugged in and in the UPS mode, press and hold this button until you hear a beep (about 2 seconds) then release it.

Results of a Self-Test:All the LEDs will be lit and the UPS will emit several short beeps as it momentarily switches to battery to test its charge and load capacity. The test will last at most 10 seconds. If the

UL2601-1 specifications

The Tripp Lite UL2601-1 is a highly regarded medical-grade power conditioner and surge protector designed to meet the demanding requirements of healthcare environments. Specifically engineered to protect sensitive electronic equipment, this device ensures both safety and performance in clinical settings where equipment reliability is paramount.

One of the standout features of the UL2601-1 is its compliance with various safety standards, including UL 60601-1 and IEC 60601-1. These certifications guarantee that the device meets stringent criteria for electrical safety, critical for protecting both patients and healthcare professionals when using medical devices such as monitors, imaging machines, and more.

The Tripp Lite UL2601-1 offers 6 NEMA outlets, providing ample capacity to manage multiple devices. Each outlet is magnetically isolated to prevent electrical noise, ensuring that sensitive medical equipment operates without interference. Additionally, the built-in 2,400 joules surge protection helps safeguard against power spikes that could cause damage to connected devices.

Another notable technology feature of the UL2601-1 is its EMI/RFI suppression. This system effectively filters electromagnetic and radio frequency interference, significantly enhancing the performance of medical devices by maintaining signal integrity. The device also includes a detachable power cord, which makes it easy to replace in the event of wear and tear while providing flexibility in installation.

In terms of user-friendly characteristics, the Tripp Lite UL2601-1 is equipped with a front-panel LED indicator that monitors power and surge protection status. This feature enables users to quickly ascertain the operational health of the device, further enhancing the reliability of the system in sensitive environments.

The compact design of the UL2601-1 allows for versatile placement options, whether it’s on a countertop, in a medical cart, or mounted in a rack. Additionally, the device is built for durability, featuring a robust housing that can withstand the rigors of a clinical atmosphere.

In summary, the Tripp Lite UL2601-1 is an essential solution for healthcare facilities looking to ensure the safety and efficacy of their medical equipment. With its advanced features, safety certifications, and user-friendly characteristics, it stands as a reliable choice for medical professionals dependent on protecting their sensitive electronic devices.