Tripp Lite UL2601-1 owner manual Storage, Service, Power Sensitivity Adjustment Select Models Only

Page 9

Basic Operation continued

NORM DELAY

Power Sensitivity Adjustment (Select Models Only)

This dial is normally set fully counterclockwise, which enables the UPS to protect against waveform distortions in its AC input. When such distortion occurs, the UPS will normally switch to providing PWM sine wave power from its battery reserves for as long as the distortion is present. In areas with poor utility power or where the UPS’s input power comes from a backup generator, chronic waveform distortion could cause the UPS to switch to battery too frequently, draining its battery reserves. You may be able to reduce how often your UPS switches to battery due to waveform distortion by experimenting with different settings for this dial. As the dial is turned clockwise, the UPS becomes more tolerant of variations in its input power’s AC waveform. NOTE: The further the dial is adjusted clockwise, the greater the degree of waveform distortion the UPS will allow to pass to connected equipment. When experimenting with different settings for this dial, operate connected equipment in a safe test mode so that the effect on the equipment of any waveform distortions in the UPS’s output can be evaluated without disrupting critical operations.

Automatic Voltage Regulation

During brownouts, your UPS will automatically correct low AC line voltage. Select models also correct high line voltage during overvolt- age conditions. When automatic voltage regulation is operating, your UPS may be heard to click gently. This is a normal, automatic opera- tion of your UPS, and no action is required on your part.

Storage & Service

Storage

All connected equipment should be turned off, then disconnected from the UPS to avoid battery drain. Unplug your UPS from its AC receptacle. CAUTION: Your UPS has an internal power source. Its outlets may still deliver current after it is unplugged, until the UPS is deactivated. To deactivate the UPS, press and hold its UPS/STANDBY button. Your UPS is now ready for storage. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the warranty period, enclose a copy of your sales receipt.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SmartPro & OmniSmart UPS Location Warnings Important Safety InstructionsUPS Connection Warnings Equipment Connection WarningsBattery Warnings Plug your equipment into Your UPS Select UPS Operating ModeExternal Batteries Select Models Only Quick Installation optionalButtons Indicator Lights Other UPS Features Power Sensitivity Adjustment Select Models Only ServiceStorage Automatic Voltage RegulationUL Classification for Medical Equipment 93-2010 Page Manual de operación Advertencias sobre la colocación del UPS Importantes instrucciones de seguridadAdvertencias sobre la conexión del UPS Advertencias sobre la conexión del equipoAdvertencias sobre las baterías Importantes instrucciones de seguridad continuaciónEnchufe su equipo al Sistema UPSSelección del modo de Operación del UPS Baterías externas Sólo para algunos modelos Instalación rápida optativaBotones Operación básica continuación Luces indicadorasVoltage Regulation regulación de voltaje, sólo para Otras características del sistema UPS Fusible de entrada sólo para ciertos modelos Conexión equipotencial sólo para ciertos modelosRegulación automática de voltaje Servicio AlmacenamientoCertificación UL2601-1 Ficha técnica continuaciónPage Guide de lutilisateur Importantes consignes de sécurité Mises en garde relatives à lemplacement du système UPSMises en garde relatives au raccord du système UPS Mises en garde relatives au raccord de léquipementMises en garde relatives à la batterie Importantes consignes de sécurité suiteBranchez votre matériel à votre système UPS Choix du mode dexploitation du système UPSBatteries externes Configurations Prédéterminées seulement Installation rapide facultativeCommutateurs « Battery Power » alimentation de batterie Ce voyant Exploitation de base suiteVoyants lumineux Porte de remplacement de la batterie Port USB configurations prédéterminées seulementAutres fonctions Bornes c.a. de qualité hôpitalRégulation de tension automatique Entretien EntreposageHomologation UL2601-1 Spécifications suite93-2010

UL2601-1 specifications

The Tripp Lite UL2601-1 is a highly regarded medical-grade power conditioner and surge protector designed to meet the demanding requirements of healthcare environments. Specifically engineered to protect sensitive electronic equipment, this device ensures both safety and performance in clinical settings where equipment reliability is paramount.

One of the standout features of the UL2601-1 is its compliance with various safety standards, including UL 60601-1 and IEC 60601-1. These certifications guarantee that the device meets stringent criteria for electrical safety, critical for protecting both patients and healthcare professionals when using medical devices such as monitors, imaging machines, and more.

The Tripp Lite UL2601-1 offers 6 NEMA outlets, providing ample capacity to manage multiple devices. Each outlet is magnetically isolated to prevent electrical noise, ensuring that sensitive medical equipment operates without interference. Additionally, the built-in 2,400 joules surge protection helps safeguard against power spikes that could cause damage to connected devices.

Another notable technology feature of the UL2601-1 is its EMI/RFI suppression. This system effectively filters electromagnetic and radio frequency interference, significantly enhancing the performance of medical devices by maintaining signal integrity. The device also includes a detachable power cord, which makes it easy to replace in the event of wear and tear while providing flexibility in installation.

In terms of user-friendly characteristics, the Tripp Lite UL2601-1 is equipped with a front-panel LED indicator that monitors power and surge protection status. This feature enables users to quickly ascertain the operational health of the device, further enhancing the reliability of the system in sensitive environments.

The compact design of the UL2601-1 allows for versatile placement options, whether it’s on a countertop, in a medical cart, or mounted in a rack. Additionally, the device is built for durability, featuring a robust housing that can withstand the rigors of a clinical atmosphere.

In summary, the Tripp Lite UL2601-1 is an essential solution for healthcare facilities looking to ensure the safety and efficacy of their medical equipment. With its advanced features, safety certifications, and user-friendly characteristics, it stands as a reliable choice for medical professionals dependent on protecting their sensitive electronic devices.
Top Page Image Contents