Tripp Lite UL2601-1 owner manual Indicator Lights

Page 7

Basic Operation continued

inverter is overloaded, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, remove some of the load and run the self-test again. If the batteries seem weak, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, let UPS charge its batteries for 12 hours and repeat the test. If the condition persists, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your equipment.

Indicator Lights

All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on.

LINE POWER: This green light will turn ON whenever your UPS is receiving normal AC line power. It will flash while the UPS is in CHARGE ONLY mode to indicate that the UPS will not provide battery backup during a blackout or brownout.

BATTERY POWER: This light will turn ON when your UPS is providing your equipment with battery power. SmartPro models only have a multicolored version of this LED that indicates battery charge level: Green means the batteries are fully charged or nearly so, yellow means the batteries are partially charged, and red means the batteries are nearly depleted.

VOLTAGE REGULATION (Select Models Only): This light will turn ON when your UPS is automatically correcting high or low utility line voltage. The UPS will also click gently when this automatic voltage regulation is operating. These are both normal functions of your UPS, and no action is required on your part.

BATTERY CHARGE: This red light will turn ON continuously after the UPS runs a self-test to indicate that the UPS’s battery is weakly charged. If it remains lit after you have allowed the UPS to charge for twelve hours and have run a second self-test, contact Tripp Lite for service.

OVERLOAD: This light has different functions depending on your

UPS model.

On OmniSmart models, this red light will turn ON continuously when the UPS is providing power from battery or after the UPS runs a self-test to indicate that the UPS’s inverter is overloaded. If it lights up, immediately remove some of the equipment connected to the UPS and run a self-test. Large overloads may cause your UPS to shut down.

On SmartPro models, this light shows how heavy is the load on the UPS’s inverter. Green indicates a light load, yellow indicates a medium load, and red indicates a heavy load (above 85% of the UPS’s output capacity). If this light is flashing, the UPS is overloaded and will not be able to provide power to connected equipment during a power outage. Unplug equipment from the UPS until this LED stops flashing.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SmartPro & OmniSmart Equipment Connection Warnings Important Safety InstructionsUPS Location Warnings UPS Connection WarningsBattery Warnings Plug your equipment into Your UPS Select UPS Operating ModeExternal Batteries Select Models Only Quick Installation optionalButtons Indicator Lights Other UPS Features Automatic Voltage Regulation ServicePower Sensitivity Adjustment Select Models Only StorageUL Classification for Medical Equipment 93-2010 Page Manual de operación Advertencias sobre la conexión del equipo Importantes instrucciones de seguridadAdvertencias sobre la colocación del UPS Advertencias sobre la conexión del UPSAdvertencias sobre las baterías Importantes instrucciones de seguridad continuaciónSistema UPS Enchufe su equipo alSelección del modo de Operación del UPS Baterías externas Sólo para algunos modelos Instalación rápida optativaBotones Luces indicadoras Operación básica continuaciónVoltage Regulation regulación de voltaje, sólo para Otras características del sistema UPS Conexión equipotencial sólo para ciertos modelos Fusible de entrada sólo para ciertos modelosRegulación automática de voltaje Servicio AlmacenamientoCertificación UL2601-1 Ficha técnica continuaciónPage Guide de lutilisateur Mises en garde relatives au raccord de léquipement Mises en garde relatives à lemplacement du système UPSImportantes consignes de sécurité Mises en garde relatives au raccord du système UPSMises en garde relatives à la batterie Importantes consignes de sécurité suiteBranchez votre matériel à votre système UPS Choix du mode dexploitation du système UPSBatteries externes Configurations Prédéterminées seulement Installation rapide facultativeCommutateurs Exploitation de base suite « Battery Power » alimentation de batterie Ce voyantVoyants lumineux Bornes c.a. de qualité hôpital Port USB configurations prédéterminées seulementPorte de remplacement de la batterie Autres fonctionsRégulation de tension automatique Entretien EntreposageHomologation UL2601-1 Spécifications suite93-2010

UL2601-1 specifications

The Tripp Lite UL2601-1 is a highly regarded medical-grade power conditioner and surge protector designed to meet the demanding requirements of healthcare environments. Specifically engineered to protect sensitive electronic equipment, this device ensures both safety and performance in clinical settings where equipment reliability is paramount.

One of the standout features of the UL2601-1 is its compliance with various safety standards, including UL 60601-1 and IEC 60601-1. These certifications guarantee that the device meets stringent criteria for electrical safety, critical for protecting both patients and healthcare professionals when using medical devices such as monitors, imaging machines, and more.

The Tripp Lite UL2601-1 offers 6 NEMA outlets, providing ample capacity to manage multiple devices. Each outlet is magnetically isolated to prevent electrical noise, ensuring that sensitive medical equipment operates without interference. Additionally, the built-in 2,400 joules surge protection helps safeguard against power spikes that could cause damage to connected devices.

Another notable technology feature of the UL2601-1 is its EMI/RFI suppression. This system effectively filters electromagnetic and radio frequency interference, significantly enhancing the performance of medical devices by maintaining signal integrity. The device also includes a detachable power cord, which makes it easy to replace in the event of wear and tear while providing flexibility in installation.

In terms of user-friendly characteristics, the Tripp Lite UL2601-1 is equipped with a front-panel LED indicator that monitors power and surge protection status. This feature enables users to quickly ascertain the operational health of the device, further enhancing the reliability of the system in sensitive environments.

The compact design of the UL2601-1 allows for versatile placement options, whether it’s on a countertop, in a medical cart, or mounted in a rack. Additionally, the device is built for durability, featuring a robust housing that can withstand the rigors of a clinical atmosphere.

In summary, the Tripp Lite UL2601-1 is an essential solution for healthcare facilities looking to ensure the safety and efficacy of their medical equipment. With its advanced features, safety certifications, and user-friendly characteristics, it stands as a reliable choice for medical professionals dependent on protecting their sensitive electronic devices.
Top Page Image Contents