Tripp Lite Single-Phase 5kVA, Single-Phase 6kVA Storage, Service, Year Limited Warranty

Page 24

Storage, Service, Warranty, Warranty Registration and Insurance

Storage

Before storing your UPS, turn it completely OFF. If you store your UPS for an extended period of time, recharge the UPS batteries for 4 to 6 hours once every three months. Note: after you connect the UPS to utility power, it will automatically begin charging its batteries. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Your SmartOnline UPS System is covered by the 2-year limited warranty period described below. A variety of Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For more information on service, call Tripp Lite Customer Support at (773) 869-1234.

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the UPS System's circuit breaker(s) are not tripped. This is the most common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. They will also discuss proper packaging and shipping procedures. Any damages (direct, indirect, special, incidental or consequen- tial) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

2-Year Limited Warranty

TRIPP LITE warrants its products including batteries to be free from defects in materials and workmanship for a period of two years from the date of initial purchase. After 90 days from the date of purchase, TRIPP LITE’s obligation under this warranty is limited to replacing parts on such defective products. To obtain service under this warranty, you must call TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. This war- ranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied war- ranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

The policy of TRIPP LITE is one of continuous improvement. Specifications are subject to change without notice.

FCC RADIO/TV INTERFERENCE NOTICE:

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

*No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction man- ual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the mark- ing name or model number of the product.

This product designed and engineered in the USA.

24

Image 24
Contents Warranty RegistrationImportant Safety Warnings Mounting Rack Post MountingPost Telecom Mounting Mounting Tower Features Power Module Front Panel ControlsFeatures Rear Panel see page 9 for feature descriptions 6kVA Power Module 6kVA Transformer Module 6kVA Battery ModuleFeatures Rear Panel see page 9 for feature descriptions Features Rear Panel Power Module Feature DescriptionBattery Module Feature Description ConnectionPlug your equipment into the power module Plug the power module into a wall receptacleConnect the battery module to the power module Plug the transformer module into the power module Hardwire the power module to your equipment Hardwire the power module to a utility power sourceConnect the power module to the transformer module Hardwire the transformer module to your equipmentHardwire the transformer module to a utility Power source Hardwire the power module to the transformer module Select the transformer module’s input voltage240V AC Optional Connection RS-232 Serial Communication ConnectionPower ON/OFF 5kVA models only Power ON/OFF 6kVA and 10kVA models only Only for power module maintenance or replacement Manual Bypass Operation 6kVA and 10kVA modelsOperation Startup Self-TestFailed Self-Test On Battery Alarm Normal OperationOverload Messages Bypass Messages Shutdown MessagesService Year Limited WarrantyStorage Regulatory Compliance Identification NumbersSpecifications SU6000RT3UXR SU10KRT3UHV* & SU10KRT3UManual del propietario Advertencias de seguridad importantes Montaje Bastidor Montaje de 4 postesMontaje de 2 postes Telecomunicaciones Montaje en torre Características Controles del panel frontal del módulo de potenciaPage Módulo de potencia de 6 kVA Módulo de transformador de 6 kVA Módulo de batería para modelo de 6 kVACaracterísticas Panel posterior Características Panel continuación Descripción de características del módulo de potenciaDescripción de características del módulo del transformador Conexión Descripción de características del módulo de bateríaConecte su equipo en el módulo de potencia Conecte el módulo de batería al módulo de potenciaConecte el módulo de transformador en el módulo de potencia Cablee el módulo de potencia a su equipo Conecte el módulo de potencia al módulo De transformador Cablee el módulo de transformador a su equipoSeleccione el voltaje de entrada del módulo De transformador Cablee el módulo de potencia al módulo de transformadorEntrada Interruptor de Interruptores/pantalla Conexión opcional Conexión de comunicación serie RS-232Encendido y apagado sólo en modelos de 5 kVA Encendido y apagado Sólo en modelos de 6 kVA y 10 kVA Page Operación Auto-prueba de arranqueFallo durante la auto-prueba Alarma On Battery Operación normalMensajes de sobrecarga Mensajes Bypass Mensajes de apagadoAlmacenamiento, Servicio y Garantía AlmacenamientoServicio Garantía limitada de 2 añosEspecificaciones SU6000RT3UXRManuel de lutilisateur Avertissements pour Maintenance Consignes de Sécurité ImportantesAvertissements pour Connexion de lEquipement Avertissements pour BatterieMontage Baie Montage à 4 supportsMontage à 2 supports Telecom Montage Tour Commandes de Panneau Avant de Module dAlimentation Caractéristiques2524 Module Alimentation 6kVA Module Transformateur 6kVA Module Batterie pour Modèle 6kVAPage Caractéristiques Panneau Arrière suite Description des Caractéristiques de Module dAlimentationConnexion Description des Caractéristiques de Module de BatterieConnexion suite Branchez votre équipement dans le module DalimentationBranchez le module dalimentation dans une prise Murale Branchez le module à piles au module dalimentationConnexion suite Câbler le module dalimentation à votre équipement Connecter le module de batterie au module dalimentationCâbler le module du transformateur à votre équipement Sélectionner la tension dentrée du module du transformateur Câbler le module dalimentation au module du TransformateurSélectionner la tension dentrée du module Du transformateur Connexion en Option Connexion Communication Série RS-232Alimentation en Marche/Arrêtée modèles 5kVA seulement Alimentation ON/OFF Modèles 6kVA et 10kVA seulement Opération Bypass Manuelle Modèles 6kVA et 10kVA seulement Fonctionnement Autotest de DémarrageEchec de lAutotest Alarme Sur Batterie Fonctionnement suiteFonctionnement Normal Messages de SurchargeMessages de Bypass Messages de FermetureEntreposage, Entretien, Garantie et Assurance EntreposageEntretien Garantie Limitée à 2 AnsSpécifications Information sur le modèle Nos de modèleÈíñòðóêöèÿ âëàäåëüöà English/Español/FrançaisÂàæíàÿ èíñòðóêöèÿ ïî áåçîïàñíîñòè Óñòàíîâêà Ñòåëëàæ Óñòàíîâêà 4-êîíòàêòíîãî ñòåëëàæàÓñòàíîâêà òåëåêîì íà 2õ îñíîâàõ Óñòàíîâêà Áàøíÿ Ñâîéñòâà Ïåðåäíÿÿ Ïàíåëü Áëîêà Ïèòàíèÿ6ÊÂÀ Áëîê Ïèòàíèÿ 6ÊÂÀ Ìîäóëü Èçîëèðóþùèé Òðàíñôîðìàòîð Ìîäóëü Áàòàðåè äëÿ ìîäåëåé 6ÊÂÀ è 10ÊÂÀ2120 Ñâîéñòâà Çàäíÿÿ Ïàíåëü ïðîäîëæåíèå Îïèñàíèå Ñâîéñòâ Áëîêà ïèòàíèÿ ìîäåëè 6ÊÂÀ è 10ÊÂÀÎïèñàíèå Ñâîéñòâ Ìîäóëÿ Áàòàðåè 6ÊÂÀ è 10ÊÂÀ Ñîåäèíåíèå Ñîåäèíèòå âàø ìîäóëü ïèòàíèÿ ñ îáîðóäîâàíèåìÑîåäèíèòå áëîê ïèòàíèÿ ñ èñòî÷íèêîì ýëåêòðîýíåðãèè Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëÿìè áëîêà ïèòàíèÿÑîåäèíåíèå ïðîäîëæåíèå Ñîåäèíèòå ìîäóëü áëîêà ïèòàíèÿ ñ ìîäóëåì ÒðàíñôîðìàòîðàÑîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ âàøèì Îáîðóäîâàíèåì Ñîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ èñòî÷íèêîìÂûáåðèòå íàïðÿæåíèå ââîäà íà ìîäóëå òðàíñôîðìàòîðà Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëåì òðàíñôîðìàòîðàÑîåäèíèòå âàø ìîäóëü òðàíñôîðìàòîðà ñ Îáîðóäîâàíèåì Äîïîëíèòåëüíîå ñîåäèíåíèå Ñâÿçü ÷åðåç Óíèâåðñàëüíûé Ñåðèéíûé Ïîðò USB RS-232ÂÊËÞ×ÈÒÜ/ÂÛÊËÞ×ÈÒÜ Page Ïðàâèëà Ïîëüçîâàíèÿ Ñàìîñòîÿòåëüíûé Ïðîâåðî÷íûé Òåñò ÑòàðòàÑàìîñòîÿòåëüíûé ïðîâåðî÷íûé òåñò íå ïðîéäåí Ïðàâèëà Ïîëüçîâàíèÿ, ïðîäîëæåíèå Íîðìàëüíîå ÏîëüçîâàíèåÇâóêîâîé Ñèãíàë Îò Áàòàðåè Ñîîáùåíèÿ î ÏåðåãðóçêåÑîîáùåíèå î Ðåæèìå Ïåðåìû÷êè Ñîîáùåíèÿ ïî îòêëþ÷åíèþÑåðâèñ/Ãàðàíòèÿ ÑåðâèñÎãðàíè÷åííàÿ 2õ ëåòíÿÿ ãàðàíòèÿ Ñïåöèôèêàöèè SU6000RT3UXRTh Street Chicago, IL 60609 USA BP Series External Battery Packs Introduction Mounting Rack Post MountingConnection Troubleshooting Internal Battery ReplacementService StorageYear Limited Warranty Regulatory Compliance Identification NumbersManual del propietario Introducción Montaje Bastidor Montaje de 4 postesMontaje en bastidor continúa Solución de problemas Reemplazo de batería internaAlmacenamiento ServicioGarantía limitada de 2 años CondicionesManuel de lutilisateur Consignes de Sécurité Importantes Conserver ces Instructions Montage Baie Montage à 4 supportsMontage Baie suite Remplacement de batterie interne DépannageStockage Garantie limitée à 2 ans Numéros didentification de conformité aux règlementsÐóêîâîäñòâî ïîëüçîâàòåëÿ Ââåäåíèå Ìîíòàæ Ñòåëëàæ Ìîíòàæ Ñòåëëàæ ïðîäîëæåíèå Ìîíòàæ íà ñòîéêå ñ 2 îïîðàìè TelecomÒåõíè÷åñêîå îáñëóæèâàíèå Ãàðàíòèéíûå îáÿçàòåëüñòâà