Tripp Lite Single-Phase 6kVA, Single-Phase 5kVA owner manual Mounting Rack, Post Mounting

Mounting (Rack)

Mount your rackmount battery pack in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications.

4-Post Mounting

All rackmount battery packs include hardware required to mount in a 4-post rack. Select models include an adjustable rackmount shelf kit to provide additional support. If your rackmount battery pack model does not include an adjustable rackmount shelf kit, skip steps 1 and 2.

1Connect the two segments of each shelf A using the included screws and nuts B . Leave the screws slightly loose so that the shelves can be adjusted in the next step.

2Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack with the screws, nuts and washers provided B . Note that the support ledges should face inward. Tighten the screws that connect the shelf segments A .

3Attach mounting ears C to the front mounting holes of your equipment D using the screws pro- vided E . The ears should face forward.

4Using an assistant if necessary, lift your equipment and slide it onto the mounting shelves. Attach your equipment to the rack by using the appropriate hardware F through its mounting ears and into the rack rails.

B

A

1

B

A

2

D

C	E
3
F
4

3