Tripp Lite Single-Phase 5kVA, Single-Phase 6kVA owner manual Important Safety Warnings

Page 2

Important Safety Warnings

SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all Tripp Lite SmartOnline Rackmount/Tower UPS Systems and their batteries.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, direct sunlight, dust and conductive contaminants.

•Install your UPS in a structurally sound area. Your UPS is extremely heavy; take care when moving and lifting the unit.

•Only operate your UPS at indoor temperatures between 32° F and 104° F (between 0° C and 40° C). For best results, keep indoor temperatures between 62° F and 84° F (between 17° C and 29° C).

•Leave adequate space around all sides of the UPS for proper ventilation.

•Do not install the UPS near magnetic storage media, as this may result in data corruption.

UPS Connection Warnings

• The power supply for this unit must be single-phase rated in accordance with the equipment nameplate. It also must be suitably grounded.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems in life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life support device.

•Connect your UPS power module’s and/or transformer module’s grounding terminal to a grounding electrode conductor.

•The UPS is connected to a DC energy source (battery). The output terminals may be live when the UPS is not connected to an AC supply.

Maintenance Warnings

•Your UPS power module, transformer module and battery module(s) do not require routine maintenance. Do not open them for any reason. There are no user-serviceable parts inside.

Battery Warnings

•Do not operate your UPS without connecting it to an external battery module.

•Connect only Tripp Lite battery modules (of the correct type and voltage) to your UPS power module's external battery connector.

•Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or in the USA only call 1-800- SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

•Fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with fuses of the same number and type.

•Service and repair should be done only by trained personnel. Prior to any service work performed on hardwired power modules, they should be turned off or manually bypassed via the transformer. Prior to any service work performed on power modules that plug directly into wall outlets, they should be turned off and unplugged. Note that potentially lethal voltages exist within this unit as long as the battery supply is connected.

•Do not connect or disconnect battery module(s) while the UPS is operating from the battery supply or when the transformer module is not in bypass mode (if your UPS system includes a transformer module with a bypass switch).

•During "hot-swap" battery module replacement your UPS will be unable to provide battery backup in the event of a blackout.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Warranty RegistrationImportant Safety Warnings Post Telecom Mounting Mounting RackPost Mounting Mounting Tower Features Power Module Front Panel ControlsFeatures Rear Panel see page 9 for feature descriptions 6kVA Power Module 6kVA Transformer Module 6kVA Battery ModuleFeatures Rear Panel see page 9 for feature descriptions Features Rear Panel Power Module Feature DescriptionBattery Module Feature Description ConnectionConnect the battery module to the power module Plug your equipment into the power modulePlug the power module into a wall receptacle Plug the transformer module into the power module Hardwire the power module to your equipment Hardwire the power module to a utility power sourceHardwire the transformer module to a utility Power source Connect the power module to the transformer moduleHardwire the transformer module to your equipment Hardwire the power module to the transformer module Select the transformer module’s input voltage240V AC Optional Connection RS-232 Serial Communication ConnectionPower ON/OFF 5kVA models only Power ON/OFF 6kVA and 10kVA models only Only for power module maintenance or replacement Manual Bypass Operation 6kVA and 10kVA modelsFailed Self-Test OperationStartup Self-Test Overload Messages On Battery AlarmNormal Operation Bypass Messages Shutdown MessagesStorage ServiceYear Limited Warranty Regulatory Compliance Identification NumbersSpecifications SU6000RT3UXR SU10KRT3UHV* & SU10KRT3UManual del propietario Advertencias de seguridad importantes Montaje de 2 postes Telecomunicaciones Montaje BastidorMontaje de 4 postes Montaje en torre Características Controles del panel frontal del módulo de potenciaPage Módulo de potencia de 6 kVA Módulo de transformador de 6 kVA Módulo de batería para modelo de 6 kVACaracterísticas Panel posterior Descripción de características del módulo del transformador Características Panel continuaciónDescripción de características del módulo de potencia Conexión Descripción de características del módulo de bateríaConecte su equipo en el módulo de potencia Conecte el módulo de batería al módulo de potenciaConecte el módulo de transformador en el módulo de potencia Cablee el módulo de potencia a su equipo Conecte el módulo de potencia al módulo De transformador Cablee el módulo de transformador a su equipoSeleccione el voltaje de entrada del módulo De transformador Cablee el módulo de potencia al módulo de transformadorEntrada Interruptor de Interruptores/pantalla Conexión opcional Conexión de comunicación serie RS-232Encendido y apagado sólo en modelos de 5 kVA Encendido y apagado Sólo en modelos de 6 kVA y 10 kVA Page Fallo durante la auto-prueba OperaciónAuto-prueba de arranque Mensajes de sobrecarga Alarma On BatteryOperación normal Mensajes Bypass Mensajes de apagadoServicio Almacenamiento, Servicio y GarantíaAlmacenamiento Garantía limitada de 2 añosEspecificaciones SU6000RT3UXRManuel de lutilisateur Avertissements pour Connexion de lEquipement Avertissements pour MaintenanceConsignes de Sécurité Importantes Avertissements pour BatterieMontage à 2 supports Telecom Montage BaieMontage à 4 supports Montage Tour Commandes de Panneau Avant de Module dAlimentation Caractéristiques2524 Module Alimentation 6kVA Module Transformateur 6kVA Module Batterie pour Modèle 6kVAPage Caractéristiques Panneau Arrière suite Description des Caractéristiques de Module dAlimentationConnexion Description des Caractéristiques de Module de BatterieBranchez le module dalimentation dans une prise Murale Connexion suiteBranchez votre équipement dans le module Dalimentation Branchez le module à piles au module dalimentationConnexion suite Câbler le module dalimentation à votre équipement Connecter le module de batterie au module dalimentationCâbler le module du transformateur à votre équipement Sélectionner la tension dentrée du module du transformateur Câbler le module dalimentation au module du TransformateurSélectionner la tension dentrée du module Du transformateur Connexion en Option Connexion Communication Série RS-232Alimentation en Marche/Arrêtée modèles 5kVA seulement Alimentation ON/OFF Modèles 6kVA et 10kVA seulement Opération Bypass Manuelle Modèles 6kVA et 10kVA seulement Echec de lAutotest FonctionnementAutotest de Démarrage Fonctionnement Normal Alarme Sur BatterieFonctionnement suite Messages de SurchargeMessages de Bypass Messages de FermetureEntretien Entreposage, Entretien, Garantie et AssuranceEntreposage Garantie Limitée à 2 AnsSpécifications Information sur le modèle Nos de modèleÈíñòðóêöèÿ âëàäåëüöà English/Español/FrançaisÂàæíàÿ èíñòðóêöèÿ ïî áåçîïàñíîñòè Óñòàíîâêà òåëåêîì íà 2õ îñíîâàõ Óñòàíîâêà ÑòåëëàæÓñòàíîâêà 4-êîíòàêòíîãî ñòåëëàæà Óñòàíîâêà Áàøíÿ Ñâîéñòâà Ïåðåäíÿÿ Ïàíåëü Áëîêà Ïèòàíèÿ6ÊÂÀ Áëîê Ïèòàíèÿ 6ÊÂÀ Ìîäóëü Èçîëèðóþùèé Òðàíñôîðìàòîð Ìîäóëü Áàòàðåè äëÿ ìîäåëåé 6ÊÂÀ è 10ÊÂÀ2120 Îïèñàíèå Ñâîéñòâ Ìîäóëÿ Áàòàðåè 6ÊÂÀ è 10ÊÂÀ Ñâîéñòâà Çàäíÿÿ Ïàíåëü ïðîäîëæåíèåÎïèñàíèå Ñâîéñòâ Áëîêà ïèòàíèÿ ìîäåëè 6ÊÂÀ è 10ÊÂÀ Ñîåäèíèòå áëîê ïèòàíèÿ ñ èñòî÷íèêîì ýëåêòðîýíåðãèè ÑîåäèíåíèåÑîåäèíèòå âàø ìîäóëü ïèòàíèÿ ñ îáîðóäîâàíèåì Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëÿìè áëîêà ïèòàíèÿÑîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ âàøèì Îáîðóäîâàíèåì Ñîåäèíåíèå ïðîäîëæåíèåÑîåäèíèòå ìîäóëü áëîêà ïèòàíèÿ ñ ìîäóëåì Òðàíñôîðìàòîðà Ñîåäèíèòå ìîäóëü òðàíñôîðìàòîðà ñ èñòî÷íèêîìÂûáåðèòå íàïðÿæåíèå ââîäà íà ìîäóëå òðàíñôîðìàòîðà Ñîåäèíèòå ìîäóëü áàòàðåè ñ ìîäóëåì òðàíñôîðìàòîðàÑîåäèíèòå âàø ìîäóëü òðàíñôîðìàòîðà ñ Îáîðóäîâàíèåì Äîïîëíèòåëüíîå ñîåäèíåíèå Ñâÿçü ÷åðåç Óíèâåðñàëüíûé Ñåðèéíûé Ïîðò USB RS-232ÂÊËÞ×ÈÒÜ/ÂÛÊËÞ×ÈÒÜ Page Ñàìîñòîÿòåëüíûé ïðîâåðî÷íûé òåñò íå ïðîéäåí Ïðàâèëà ÏîëüçîâàíèÿÑàìîñòîÿòåëüíûé Ïðîâåðî÷íûé Òåñò Ñòàðòà Çâóêîâîé Ñèãíàë Îò Áàòàðåè Ïðàâèëà Ïîëüçîâàíèÿ, ïðîäîëæåíèåÍîðìàëüíîå Ïîëüçîâàíèå Ñîîáùåíèÿ î ÏåðåãðóçêåÑîîáùåíèå î Ðåæèìå Ïåðåìû÷êè Ñîîáùåíèÿ ïî îòêëþ÷åíèþÎãðàíè÷åííàÿ 2õ ëåòíÿÿ ãàðàíòèÿ Ñåðâèñ/ÃàðàíòèÿÑåðâèñ Ñïåöèôèêàöèè SU6000RT3UXRTh Street Chicago, IL 60609 USA BP Series External Battery Packs Introduction Mounting Rack Post MountingConnection Service TroubleshootingInternal Battery Replacement StorageYear Limited Warranty Regulatory Compliance Identification NumbersManual del propietario Introducción Montaje Bastidor Montaje de 4 postesMontaje en bastidor continúa Almacenamiento Solución de problemasReemplazo de batería interna ServicioGarantía limitada de 2 años CondicionesManuel de lutilisateur Consignes de Sécurité Importantes Conserver ces Instructions Montage Baie Montage à 4 supportsMontage Baie suite Stockage Remplacement de batterie interneDépannage Garantie limitée à 2 ans Numéros didentification de conformité aux règlementsÐóêîâîäñòâî ïîëüçîâàòåëÿ Ââåäåíèå Ìîíòàæ Ñòåëëàæ Ìîíòàæ Ñòåëëàæ ïðîäîëæåíèå Ìîíòàæ íà ñòîéêå ñ 2 îïîðàìè TelecomÒåõíè÷åñêîå îáñëóæèâàíèå Ãàðàíòèéíûå îáÿçàòåëüñòâà
Top Page Image Contents