Moxa Technologies EDS-510A, Moxa EtherDevice Switch user manual Configuration using a Web Browser

Page 13

EDS-510A Series User’s Manual

Getting Started

4.When the Main Menu of the EDS-510A’s console utility opens, click Terminal Æ preferences… from the menu at the top of the window.

5.When the Terminal Preferences window opens, make sure that the VT100 Arrows option is selected.

NOTE

The Telnet Console looks and operates in precisely the same manner as the RS-232 Console.

 

 

Configuration using a Web Browser

The EDS-510A’s web browser interface provides a convenient way to modify the switch’s configuration and access the built-in monitoring and network administration functions. You may use either Internet Explorer or Netscape to access the EDS-510A.

NOTE

To use the EDS-510A’s management and monitoring functions from a PC host connected to the

 

same LAN as the EDS-510A, you must make sure that the PC host and the EDS-510A are on the

 

same logical subnet.

 

 

 

 

NOTE

If the EDS-510A is configured for other VLAN settings, you must make sure your PC host is on

 

the management VLAN.

 

 

 

 

NOTE

Before accessing the EDS-510A’s web browser interface, first connect one of the switch’s RJ45

 

Ethernet ports to your Ethernet LAN, or connect directly to your PC’s Ethernet card (NIC). You

 

can establish a connection using either a straight-through or cross-over Ethernet cable.

 

 

 

 

NOTE

The EDS-510A’s default IP is 192.168.127.253.

 

 

2-6

Page 12 Page 14
Image 13
Page 12 Page 14
Contents First Edition, October Moxa EtherDevice Switch EDS-510A Series User’s ManualTrademarks Copyright NoticeDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Features Package ChecklistOverview Industrial Networking CapabilityRecommended Software and Accessories Useful Utility and Remote ConfigurationGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-510A Series User’s Manual Key Function Configuration using a Telnet Console Configuration using a Web Browser EDS-510A Series User’s Manual Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic SettingsPassword PasswordAccount Any host on a specific subnetwork can access the EDS-510A Accessible IPAny host can access the EDS-510A Allowable Hosts Input formatPort EnableDescription NameSpeed NetworkFDX Flow Ctrl Switch IP Address Auto IP ConfigurationSwitch Subnet Mask Default GatewayCurrent Time TimeCurrent Date System Up TimeTime zone before setting the time Turbo Ring DIP SwitchTime Server IP/Name Time Server Query PeriodDIP Switch Turbo Ring DIP Description DIP Switch Hardware ConfigurationConfiguration Files Path and Name System File Update-By Remote TftpTftp Server IP/Name Firmware Files Path and NameSystem File Update-By Backup Media System File Update-By Local Import/ExportFactory Default Using Port TrunkingRestart Port Trunking Concept Trunk Group Maximum of 3 trunk groups Configuring Port TrunkingTrunk Type Setting Description Configuring SnmpAvailable Ports/Member Port Trunk TableV1, V2c Read Community Snmp VersionsV1, V2c Write/Read Community 1st Trap Server IP/Name Trap SettingsPrivate MIB information Using Communication RedundancyGigabit Ethernet Redundant Ring Capability 300 ms Turbo Ring Concept Initial SetupWhen the number of EDS-510A units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept Following explanation uses bridge instead of switch What is STP?STP Requirements How STP WorksPort Speed Path Cost 802.1D Edition 802.1w-2001 STP CalculationSTP Reconfiguration STP ConfigurationDifferences between Rstp and STP STP ExampleUsing STP on a Network with Multiple VLANs Root/Not Root Configuring STP/RSTPEnable STP per Port Forwarding DelayProtocol of Redundancy Bridge priorityPort Priority Configuration Limits of RSTP/STPPort Cost Port StatusWhat is Traffic Prioritization? Using Traffic PrioritizationTraffic Prioritization Concept How Traffic Prioritization WorksIeee 802.1p Priority Level Ieee 802.1D Traffic Type Differentiated Services DiffServ Traffic MarkingTraffic Prioritization QoS Classification Configuring Traffic PrioritizationTraffic Queues Port Highest Priority Queuing MechanismInspect TOS Inspect COSCoS Mapping Setting Description FactoryTOS/DiffServ Mapping What is a VLAN? Using Virtual LANVirtual LAN Vlan Concept Benefits of VLANsManaging a Vlan VLANs and Moxa EtherDevice SwitchCommunication Between VLANs VLANs Tagged and Untagged MembershipDevice Sample Applications of VLANs using Moxa EDS-510AVlan Settings Configuring Virtual LANManagement Vlan ID Vlan ModePort Type Port PvidPort Vlan TableWhat is an IP Multicast? Using Multicast FilteringConcept of Multicast Filtering Benefits of MulticastIgmp Internet Group Management Protocol Snooping Mode Multicast Filtering and Moxa EtherDevice SwitchNetwork without multicast filtering Igmp Multicast Filtering Query ModeGmrp Garp Multicast Registration Protocol Static Multicast MACIgmp Snooping Settings Configuring Igmp SnoopingAdd Static Multicast MAC Configuring Gmrp Using Bandwidth ManagementGmrp enable Gmrp TableTraffic Rate Limiting Settings Using Port Access ControlStatic Port Lock IeeeMessage Exchange Configuring Ieee Configuring Static Port LockRadius Server Database OptionServer Port Shared KeyLocal User Database Setup 802.1X Re-Authentication802.1X Re-Authentication Local User Database SetupConfiguring Email Warning Using Auto WarningPort Access Control Table System Events Event TypePort Events Password Setting Email SetupMail Server IP/Name Account NameEvent Setup Configuring Relay WarningEmail Address Send Test EmailSystem Events Using Set Device IP Using Line-Swap-Fast-RecoveryConfiguring Line-Swap Fast Recovery Override relay alarm settingsSet up the connected devices Configuring Set Device IPMirror Port Using DiagnosisOutput data stream Bi-directionalMonitor by Switch Using MonitorPing Monitor by Port Using the MAC Address TableMAC Using Event LogUsing HTTPS/SSL Using SyslogSyslog Settings EDS-510A Series User’s Manual Featured Functions EDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Modify IP Address Upgrade FirmwareExport Configuration Import Configuration Locked Unlock ServerUnlocked BlankLocked Fixed FixedUnlocked Fixed MIB Groups MIB II.11 Snmp Group MIB II.10 Transmission GroupMIB II.17 dot1dBridge Group Private Traps Public TrapsTechnology SpecificationsInterface Environmental MechanicalRegulatory Approvals Service Information Following services are provided Moxa Internet ServicesSerial Number Problem Report FormProduct Return Procedure

EDS-510A, Moxa EtherDevice Switch specifications

Moxa Technologies is a leader in providing innovative networking solutions for industrial applications, and one of its standout products is the Moxa EtherDevice Switch, EDS-510A. This robust, managed Ethernet switch is specifically designed for reliable performance in challenging industrial environments, making it an ideal choice for various applications, including automation, transportation, and power generation.

The EDS-510A features five 10/100Base-TX Fast Ethernet ports, allowing flexibility in connecting multiple devices. Additionally, it offers two Gigabit Ethernet ports for uplink, enabling high-speed connections to aggregation switches or routers. The switch supports both redundant power inputs and a wide operating temperature range of -40 to 75 degrees Celsius, ensuring continuity of service even in extreme conditions.

One of the key features of the EDS-510A is its support for IEEE 802.3at PoE (Power over Ethernet). This technology allows the switch to deliver power to connected devices such as IP cameras and wireless access points through the Ethernet cable, which simplifies installation and reduces the need for additional power sources. This is especially beneficial in remote locations where power availability may be limited.

The EDS-510A is also equipped with advanced management features that include VLAN support, port mirroring, and QoS (Quality of Service) capabilities. These features enhance network performance and security, enabling users to prioritize critical traffic and segment the network for better control. Moreover, it supports SNMP (Simple Network Management Protocol), allowing for easy integration into existing network management systems.

Another notable characteristic is the switch's rugged design. With a metal housing that provides excellent EMI (Electromagnetic Interference) protection, the EDS-510A can withstand harsh industrial environments. It is also compliant with various industrial standards, reinforcing its suitability for mission-critical applications.

In summary, the Moxa EtherDevice Switch, EDS-510A, is engineered to meet the demands of modern industrial networking. With its combination of PoE capability, advanced management features, and rugged design, it ensures reliable and efficient network performance, making it an excellent choice for organizations looking to enhance their industrial networking infrastructure. Whether deployed in factories, transportation systems, or utility environments, the EDS-510A continues to be a trusted solution for numerous applications.
Top Page Image Contents