Moxa Technologies Moxa EtherDevice Switch Vlan Mode, Management Vlan ID, Port Type, Port Pvid

Page 56

EDS-510A Series User’s Manual

Featured Functions

 

VLAN Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting

Description

 

 

Factory Default

 

 

802.1Q VLAN

Set VLAN mode to 802.1Q VLAN

 

 

802.1Q VLAN

 

 

Port-based VLAN

Set VLAN mode to Port-based VLAN

 

 

 

 

 

 

 

 

 

Management VLAN ID

 

 

 

 

 

 

 

 

 

 

 

Setting

Description

 

 

Factory Default

 

 

VLAN ID

Set the management VLAN of this EDS-510A.

 

1

 

 

ranges from

 

 

 

 

 

 

1 to 4094

 

 

 

 

 

 

Port Type

 

 

 

 

 

 

 

 

 

 

 

 

Setting

Description

 

 

Factory Default

 

 

Access

This port type is used to connect single devices without

 

 

 

 

tags.

 

 

 

 

 

Trunk

Select “Trunk” port type to connect another 802.1Q

 

 

Access

 

 

 

VLAN aware switch or another LAN that combines

 

 

 

 

 

 

tagged and/or untagged devices and/or other

 

 

 

 

 

 

switches/hubs.

 

 

 

 

ATTENTION

For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and “Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of different VLANs to different EDS-510A units.

Port PVID

Setting

Description

Factory Default

VID range from 1

Set the port default VLAN ID for untagged devices that

1

to 4094

connect to the port.

 

Fixed VLAN List (Tagged)

 

 

 

 

Setting

Description

Factory Default

VID range from 1

This field will be active only when selecting the “Trunk”

None

to 4094

port type. Set the other VLAN ID for tagged devices that

 

 

connect to the “Trunk” port. Use commas to separate

 

 

different VIDs.

 

Forbidden VLAN List

 

 

 

 

Setting

Description

Factory Default

VID range from 1

This field will be active only when selecting the “Trunk”

None

to 4094

port type. Set the VLAN IDs that will not be supported

 

 

by this trunk port. Use commas to separate different

 

 

VIDs.

 

3-41

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Moxa EtherDevice Switch EDS-510A Series User’s Manual First Edition, OctoberDisclaimer Copyright NoticeTrademarks Table of Contents Chapter EDS Configurator GUI Introduction Package Checklist FeaturesOverview Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-510A Series User’s Manual Key Function Configuration using a Telnet Console Configuration using a Web Browser EDS-510A Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationAccount PasswordPassword Accessible IP Any host on a specific subnetwork can access the EDS-510AAny host can access the EDS-510A Allowable Hosts Input formatEnable PortDescription NameFDX Flow Ctrl NetworkSpeed Auto IP Configuration Switch IP AddressSwitch Subnet Mask Default GatewayTime Current TimeCurrent Date System Up TimeTurbo Ring DIP Switch Time zone before setting the timeTime Server IP/Name Time Server Query PeriodDIP Switch Hardware Configuration DIP Switch Turbo Ring DIP DescriptionSystem File Update-By Remote Tftp Configuration Files Path and NameTftp Server IP/Name Firmware Files Path and NameSystem File Update-By Local Import/Export System File Update-By Backup MediaRestart Using Port TrunkingFactory Default Port Trunking Concept Trunk Type Configuring Port TrunkingTrunk Group Maximum of 3 trunk groups Configuring Snmp Setting DescriptionAvailable Ports/Member Port Trunk TableV1, V2c Write/Read Community Snmp VersionsV1, V2c Read Community Trap Settings 1st Trap Server IP/NameGigabit Ethernet Redundant Ring Capability 300 ms Using Communication RedundancyPrivate MIB information Initial Setup Turbo Ring ConceptWhen the number of EDS-510A units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? Following explanation uses bridge instead of switchHow STP Works STP RequirementsPort Speed Path Cost 802.1D Edition 802.1w-2001 STP CalculationSTP Configuration STP ReconfigurationDifferences between Rstp and STP STP ExampleUsing STP on a Network with Multiple VLANs Configuring STP/RSTP Root/Not RootForwarding Delay Enable STP per PortProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP Port PriorityPort Cost Port StatusUsing Traffic Prioritization What is Traffic Prioritization?Traffic Prioritization Concept How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues Configuring Traffic PrioritizationQoS Classification Queuing Mechanism Port Highest PriorityInspect TOS Inspect COSTOS/DiffServ Mapping Setting Description FactoryCoS Mapping Using Virtual LAN What is a VLAN?Virtual LAN Vlan Concept Benefits of VLANsVLANs and Moxa EtherDevice Switch Managing a VlanCommunication Between VLANs VLANs Tagged and Untagged MembershipSample Applications of VLANs using Moxa EDS-510A DeviceConfiguring Virtual LAN Vlan SettingsVlan Mode Management Vlan IDPort Type Port PvidVlan Table PortUsing Multicast Filtering What is an IP Multicast?Concept of Multicast Filtering Benefits of MulticastNetwork without multicast filtering Multicast Filtering and Moxa EtherDevice SwitchIgmp Internet Group Management Protocol Snooping Mode Query Mode Igmp Multicast FilteringGmrp Garp Multicast Registration Protocol Static Multicast MACConfiguring Igmp Snooping Igmp Snooping SettingsAdd Static Multicast MAC Using Bandwidth Management Configuring GmrpGmrp enable Gmrp TableUsing Port Access Control Traffic Rate Limiting SettingsStatic Port Lock IeeeMessage Exchange Configuring Static Port Lock Configuring IeeeDatabase Option Radius ServerServer Port Shared Key802.1X Re-Authentication Local User Database Setup802.1X Re-Authentication Local User Database SetupPort Access Control Table Using Auto WarningConfiguring Email Warning Port Events Event TypeSystem Events Email Setup Password SettingMail Server IP/Name Account NameConfiguring Relay Warning Event SetupEmail Address Send Test EmailSystem Events Using Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Override relay alarm settingsConfiguring Set Device IP Set up the connected devicesUsing Diagnosis Mirror PortOutput data stream Bi-directionalPing Using MonitorMonitor by Switch Using the MAC Address Table Monitor by PortUsing Event Log MACSyslog Settings Using SyslogUsing HTTPS/SSL EDS-510A Series User’s Manual Featured Functions EDS Configurator GUI Starting EDS Configurator Broadcast SearchSearch by IP address Upgrade Firmware Modify IP AddressExport Configuration Import Configuration Unlock Server LockedUnlocked BlankUnlocked Fixed FixedLocked Fixed MIB Groups MIB II.17 dot1dBridge Group MIB II.10 Transmission GroupMIB II.11 Snmp Group Public Traps Private TrapsInterface SpecificationsTechnology Regulatory Approvals MechanicalEnvironmental Service Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure

EDS-510A, Moxa EtherDevice Switch specifications

Moxa Technologies is a leader in providing innovative networking solutions for industrial applications, and one of its standout products is the Moxa EtherDevice Switch, EDS-510A. This robust, managed Ethernet switch is specifically designed for reliable performance in challenging industrial environments, making it an ideal choice for various applications, including automation, transportation, and power generation.

The EDS-510A features five 10/100Base-TX Fast Ethernet ports, allowing flexibility in connecting multiple devices. Additionally, it offers two Gigabit Ethernet ports for uplink, enabling high-speed connections to aggregation switches or routers. The switch supports both redundant power inputs and a wide operating temperature range of -40 to 75 degrees Celsius, ensuring continuity of service even in extreme conditions.

One of the key features of the EDS-510A is its support for IEEE 802.3at PoE (Power over Ethernet). This technology allows the switch to deliver power to connected devices such as IP cameras and wireless access points through the Ethernet cable, which simplifies installation and reduces the need for additional power sources. This is especially beneficial in remote locations where power availability may be limited.

The EDS-510A is also equipped with advanced management features that include VLAN support, port mirroring, and QoS (Quality of Service) capabilities. These features enhance network performance and security, enabling users to prioritize critical traffic and segment the network for better control. Moreover, it supports SNMP (Simple Network Management Protocol), allowing for easy integration into existing network management systems.

Another notable characteristic is the switch's rugged design. With a metal housing that provides excellent EMI (Electromagnetic Interference) protection, the EDS-510A can withstand harsh industrial environments. It is also compliant with various industrial standards, reinforcing its suitability for mission-critical applications.

In summary, the Moxa EtherDevice Switch, EDS-510A, is engineered to meet the demands of modern industrial networking. With its combination of PoE capability, advanced management features, and rugged design, it ensures reliable and efficient network performance, making it an excellent choice for organizations looking to enhance their industrial networking infrastructure. Whether deployed in factories, transportation systems, or utility environments, the EDS-510A continues to be a trusted solution for numerous applications.
Top Page Image Contents