Moxa Technologies EDS-510A, Moxa EtherDevice Switch Specifications, Technology, Interface

Page 93

B

Specifications

Technology

 

Standards

IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w, 802.1Q, 802.1p

Protocols

IGMP V1/V2/V3 device, GVRP, SNMP V1/V2c/V3, DHCP

 

Server/Client, BOOTP, TFTP, SNTP, SMTP, RARP and

 

EDS-SNMP OPC server Pro (Optional)

MIB

MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE

 

MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1,2.3,9

Interface

 

RJ45 Ports

10/100/1000BaseT(X) auto negotiation speed, F/H duplex

 

mode, and auto MDI/MDI-X connection

Fiber Ports

Optional 1000BaseSX/LX/LHX/ZX (LC connector)

Console

RS-232 (RJ45)

LED Indicators

PWR1, PWR2, FAULT, 10/100M (TP port), 1000M, Ring

 

Master, and Ring Coupler

Alarm Contact

Two relay outputs with current carrying capacity of 1A @ 24

 

VDC

Digital Input

Two inputs with the same ground, but electrically isolated from

 

the electronics

 

• For state “1”: +13 to +30V

 

• For state “0”: -30 to +3V

 

• Max. input current: 8 mA

1000BaseSX/LX/LHX/ZX

 

Distance:

 

Multi mode:

 

‧1000BaseSX

0 to 500m, 850 nm (50/125 µm, 400 MHz*km)

 

0 to 275m, 850 nm (62.5/125 µm, 200 MHz*km)

‧1000BaseLX

0 to 1100m, 1310 nm (50/125 µm, 800 MHz*km)

 

0 to 550m, 1310 nm (62.5.125 µm, 500 MHz*km)

Single mode:

 

‧1000BaseLX

0 to 10 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))

‧1000BaseLHX

0 to 40 km, 1310 nm ((9/125 µm, 3.5 PS/(nm*km)))

‧1000BaseZX

0 to 80 km, 1550 nm ((9/125 µm, 19 PS/(nm*km))

Page 92 Page 94
Image 93
Page 92 Page 94
Contents First Edition, October Moxa EtherDevice Switch EDS-510A Series User’s ManualCopyright Notice TrademarksDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Features Package ChecklistOverview Industrial Networking CapabilityRecommended Software and Accessories Useful Utility and Remote ConfigurationGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-510A Series User’s Manual Key Function Configuration using a Telnet Console Configuration using a Web Browser EDS-510A Series User’s Manual Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic SettingsPassword PasswordAccount Any host on a specific subnetwork can access the EDS-510A Accessible IPAny host can access the EDS-510A Allowable Hosts Input formatPort EnableDescription NameNetwork SpeedFDX Flow Ctrl Switch IP Address Auto IP ConfigurationSwitch Subnet Mask Default GatewayCurrent Time TimeCurrent Date System Up TimeTime zone before setting the time Turbo Ring DIP SwitchTime Server IP/Name Time Server Query PeriodDIP Switch Turbo Ring DIP Description DIP Switch Hardware ConfigurationConfiguration Files Path and Name System File Update-By Remote TftpTftp Server IP/Name Firmware Files Path and NameSystem File Update-By Backup Media System File Update-By Local Import/ExportUsing Port Trunking Factory DefaultRestart Port Trunking Concept Configuring Port Trunking Trunk Group Maximum of 3 trunk groupsTrunk Type Setting Description Configuring SnmpAvailable Ports/Member Port Trunk TableSnmp Versions V1, V2c Read CommunityV1, V2c Write/Read Community 1st Trap Server IP/Name Trap SettingsUsing Communication Redundancy Private MIB informationGigabit Ethernet Redundant Ring Capability 300 ms Turbo Ring Concept Initial SetupWhen the number of EDS-510A units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept Following explanation uses bridge instead of switch What is STP?STP Requirements How STP WorksPort Speed Path Cost 802.1D Edition 802.1w-2001 STP CalculationSTP Reconfiguration STP ConfigurationDifferences between Rstp and STP STP ExampleUsing STP on a Network with Multiple VLANs Root/Not Root Configuring STP/RSTPEnable STP per Port Forwarding DelayProtocol of Redundancy Bridge priorityPort Priority Configuration Limits of RSTP/STPPort Cost Port StatusWhat is Traffic Prioritization? Using Traffic PrioritizationTraffic Prioritization Concept How Traffic Prioritization WorksDifferentiated Services DiffServ Traffic Marking Ieee 802.1p Priority Level Ieee 802.1D Traffic TypeTraffic Prioritization Configuring Traffic Prioritization QoS ClassificationTraffic Queues Port Highest Priority Queuing MechanismInspect TOS Inspect COSSetting Description Factory CoS MappingTOS/DiffServ Mapping What is a VLAN? Using Virtual LANVirtual LAN Vlan Concept Benefits of VLANsManaging a Vlan VLANs and Moxa EtherDevice SwitchCommunication Between VLANs VLANs Tagged and Untagged MembershipDevice Sample Applications of VLANs using Moxa EDS-510AVlan Settings Configuring Virtual LANManagement Vlan ID Vlan ModePort Type Port PvidPort Vlan TableWhat is an IP Multicast? Using Multicast FilteringConcept of Multicast Filtering Benefits of MulticastMulticast Filtering and Moxa EtherDevice Switch Igmp Internet Group Management Protocol Snooping ModeNetwork without multicast filtering Igmp Multicast Filtering Query ModeGmrp Garp Multicast Registration Protocol Static Multicast MACIgmp Snooping Settings Configuring Igmp SnoopingAdd Static Multicast MAC Configuring Gmrp Using Bandwidth ManagementGmrp enable Gmrp TableTraffic Rate Limiting Settings Using Port Access ControlStatic Port Lock IeeeMessage Exchange Configuring Ieee Configuring Static Port LockRadius Server Database OptionServer Port Shared KeyLocal User Database Setup 802.1X Re-Authentication802.1X Re-Authentication Local User Database SetupUsing Auto Warning Configuring Email WarningPort Access Control Table Event Type System EventsPort Events Password Setting Email SetupMail Server IP/Name Account NameEvent Setup Configuring Relay WarningEmail Address Send Test EmailSystem Events Using Set Device IP Using Line-Swap-Fast-RecoveryConfiguring Line-Swap Fast Recovery Override relay alarm settingsSet up the connected devices Configuring Set Device IPMirror Port Using DiagnosisOutput data stream Bi-directionalUsing Monitor Monitor by SwitchPing Monitor by Port Using the MAC Address TableMAC Using Event LogUsing Syslog Using HTTPS/SSLSyslog Settings EDS-510A Series User’s Manual Featured Functions EDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Modify IP Address Upgrade FirmwareExport Configuration Import Configuration Locked Unlock ServerUnlocked BlankFixed Locked FixedUnlocked Fixed MIB Groups MIB II.10 Transmission Group MIB II.11 Snmp GroupMIB II.17 dot1dBridge Group Private Traps Public TrapsSpecifications TechnologyInterface Mechanical EnvironmentalRegulatory Approvals Service Information Following services are provided Moxa Internet ServicesSerial Number Problem Report FormProduct Return Procedure

EDS-510A, Moxa EtherDevice Switch specifications

Moxa Technologies is a leader in providing innovative networking solutions for industrial applications, and one of its standout products is the Moxa EtherDevice Switch, EDS-510A. This robust, managed Ethernet switch is specifically designed for reliable performance in challenging industrial environments, making it an ideal choice for various applications, including automation, transportation, and power generation.

The EDS-510A features five 10/100Base-TX Fast Ethernet ports, allowing flexibility in connecting multiple devices. Additionally, it offers two Gigabit Ethernet ports for uplink, enabling high-speed connections to aggregation switches or routers. The switch supports both redundant power inputs and a wide operating temperature range of -40 to 75 degrees Celsius, ensuring continuity of service even in extreme conditions.

One of the key features of the EDS-510A is its support for IEEE 802.3at PoE (Power over Ethernet). This technology allows the switch to deliver power to connected devices such as IP cameras and wireless access points through the Ethernet cable, which simplifies installation and reduces the need for additional power sources. This is especially beneficial in remote locations where power availability may be limited.

The EDS-510A is also equipped with advanced management features that include VLAN support, port mirroring, and QoS (Quality of Service) capabilities. These features enhance network performance and security, enabling users to prioritize critical traffic and segment the network for better control. Moreover, it supports SNMP (Simple Network Management Protocol), allowing for easy integration into existing network management systems.

Another notable characteristic is the switch's rugged design. With a metal housing that provides excellent EMI (Electromagnetic Interference) protection, the EDS-510A can withstand harsh industrial environments. It is also compliant with various industrial standards, reinforcing its suitability for mission-critical applications.

In summary, the Moxa EtherDevice Switch, EDS-510A, is engineered to meet the demands of modern industrial networking. With its combination of PoE capability, advanced management features, and rugged design, it ensures reliable and efficient network performance, making it an excellent choice for organizations looking to enhance their industrial networking infrastructure. Whether deployed in factories, transportation systems, or utility environments, the EDS-510A continues to be a trusted solution for numerous applications.
Top Page Image Contents