Featured Functions |
Configuring IGMP Snooping
IGMP Snooping provides the ability to prune multicast traffic so that it travels only to those end destinations that require that traffic, thereby reducing the amount of traffic on the Ethernet LAN.
IGMP Snooping Settings
IGMP Snooping Enable
Setting | Description | Factory Default |
Enable/Disable | Select the option to enable the IGMP Snooping function | Disabled |
| globally. |
|
Query Interval |
|
|
|
|
|
Setting | Description | Factory Default |
Numerical value | Set the query interval of the Querier function globally. | 125 seconds |
input by user | Valid settings are from 20 to 600 seconds. |
|
IGMP Snooping |
|
|
|
|
|
Setting | Description | Factory Default |
Enable/Disable | Select the option to enable the IGMP Snooping function | Enabled if IGMP |
| per VLAN. | Snooping Enabled |
|
| Globally |
Querier |
|
|
|
|
|
Setting | Description | Factory Default |
Enable/Disable | Select the option to enable the | Enabled if IGMP |
| function. | Snooping is |
|
| Enabled Globally |
Static Multicast Router Port |
| |
|
|
|
Setting | Description | Factory Default |
Select/Deselect | Select the option to select which ports will connect to | Disabled |
| the multicast routers. It’s active only when IGMP |
|
| Snooping is enabled. |
|