Moxa Technologies EDS-510A, Moxa EtherDevice Switch user manual Using Event Log, Mac

Page 79

EDS-510A Series User’s Manual

Featured Functions

The table will display the following information:

MAC

Type

Port

This field shows the MAC address

This field shows the type of this MAC address

This field shows the port that this MAC address belongs to

Using Event Log

 

Bootup

This field shows how many times the EDS-510A has been rebooted or cold started.

 

 

Date

The date is updated based on how the current date is set in the “Basic Setting” page.

 

 

Time

The time is updated based on how the current time is set in the “Basic Setting” page.

 

 

System

The system startup time related to this event.

 

 

Startup

 

 

 

Time

 

 

 

Events

Events that have occurred.

 

 

 

 

NOTE

The following events will be recorded into the EDS-510A’s Event Log table:

 

 

1.

Cold start

 

 

2.

Warm start

 

 

3.

Configuration change activated

 

 

4.

Power 1/2 transition (Off Æ On), Power 1/2 transition (On Æ Off)

 

 

5.

Authentication fail

 

 

6.

Topology changed

 

 

7.

Master setting is mismatched

 

 

8.

DI 1/2 transition (Off Æ On), DI 1/2 transition (On Æ Off)

 

 

9.

Port traffic overload

 

 

10.

dot1x Auth Fail

 

 

11.

Port link off / on

 

 

 

 

 

 

3-64

Page 78 Page 80
Image 79
Page 78 Page 80
Contents First Edition, October Moxa EtherDevice Switch EDS-510A Series User’s ManualTrademarks Copyright NoticeDisclaimer Table of Contents Chapter EDS Configurator GUI Introduction Industrial Networking Capability Package ChecklistFeatures OverviewRecommended Software and Accessories Useful Utility and Remote ConfigurationGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-510A Series User’s Manual Key Function Configuration using a Telnet Console Configuration using a Web Browser EDS-510A Series User’s Manual Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic SettingsPassword PasswordAccount Allowable Hosts Input format Accessible IPAny host on a specific subnetwork can access the EDS-510A Any host can access the EDS-510AName EnablePort DescriptionSpeed NetworkFDX Flow Ctrl Default Gateway Auto IP ConfigurationSwitch IP Address Switch Subnet MaskSystem Up Time TimeCurrent Time Current DateTime Server Query Period Turbo Ring DIP SwitchTime zone before setting the time Time Server IP/NameDIP Switch Turbo Ring DIP Description DIP Switch Hardware ConfigurationFirmware Files Path and Name System File Update-By Remote TftpConfiguration Files Path and Name Tftp Server IP/NameSystem File Update-By Backup Media System File Update-By Local Import/ExportFactory Default Using Port TrunkingRestart Port Trunking Concept Trunk Group Maximum of 3 trunk groups Configuring Port TrunkingTrunk Type Trunk Table Configuring SnmpSetting Description Available Ports/Member PortV1, V2c Read Community Snmp VersionsV1, V2c Write/Read Community 1st Trap Server IP/Name Trap SettingsPrivate MIB information Using Communication RedundancyGigabit Ethernet Redundant Ring Capability 300 ms Turbo Ring Concept Initial SetupWhen the number of EDS-510A units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept Following explanation uses bridge instead of switch What is STP?STP Calculation How STP WorksSTP Requirements Port Speed Path Cost 802.1D Edition 802.1w-2001STP Example STP ConfigurationSTP Reconfiguration Differences between Rstp and STPUsing STP on a Network with Multiple VLANs Root/Not Root Configuring STP/RSTPBridge priority Forwarding DelayEnable STP per Port Protocol of RedundancyPort Status Configuration Limits of RSTP/STPPort Priority Port CostHow Traffic Prioritization Works Using Traffic PrioritizationWhat is Traffic Prioritization? Traffic Prioritization ConceptIeee 802.1p Priority Level Ieee 802.1D Traffic Type Differentiated Services DiffServ Traffic MarkingTraffic Prioritization QoS Classification Configuring Traffic PrioritizationTraffic Queues Inspect COS Queuing MechanismPort Highest Priority Inspect TOSCoS Mapping Setting Description FactoryTOS/DiffServ Mapping Benefits of VLANs Using Virtual LANWhat is a VLAN? Virtual LAN Vlan ConceptVLANs Tagged and Untagged Membership VLANs and Moxa EtherDevice SwitchManaging a Vlan Communication Between VLANsDevice Sample Applications of VLANs using Moxa EDS-510AVlan Settings Configuring Virtual LANPort Pvid Vlan ModeManagement Vlan ID Port TypePort Vlan TableBenefits of Multicast Using Multicast FilteringWhat is an IP Multicast? Concept of Multicast FilteringIgmp Internet Group Management Protocol Snooping Mode Multicast Filtering and Moxa EtherDevice SwitchNetwork without multicast filtering Static Multicast MAC Query ModeIgmp Multicast Filtering Gmrp Garp Multicast Registration ProtocolIgmp Snooping Settings Configuring Igmp SnoopingAdd Static Multicast MAC Gmrp Table Using Bandwidth ManagementConfiguring Gmrp Gmrp enableIeee Using Port Access ControlTraffic Rate Limiting Settings Static Port LockMessage Exchange Configuring Ieee Configuring Static Port LockShared Key Database OptionRadius Server Server PortLocal User Database Setup 802.1X Re-AuthenticationLocal User Database Setup 802.1X Re-AuthenticationConfiguring Email Warning Using Auto WarningPort Access Control Table System Events Event TypePort Events Account Name Email SetupPassword Setting Mail Server IP/NameSend Test Email Configuring Relay WarningEvent Setup Email AddressSystem Events Override relay alarm settings Using Line-Swap-Fast-RecoveryUsing Set Device IP Configuring Line-Swap Fast RecoverySet up the connected devices Configuring Set Device IPBi-directional Using DiagnosisMirror Port Output data streamMonitor by Switch Using MonitorPing Monitor by Port Using the MAC Address TableMAC Using Event LogUsing HTTPS/SSL Using SyslogSyslog Settings EDS-510A Series User’s Manual Featured Functions EDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Modify IP Address Upgrade FirmwareExport Configuration Import Configuration Blank Unlock ServerLocked UnlockedLocked Fixed FixedUnlocked Fixed MIB Groups MIB II.11 Snmp Group MIB II.10 Transmission GroupMIB II.17 dot1dBridge Group Private Traps Public TrapsTechnology SpecificationsInterface Environmental MechanicalRegulatory Approvals Service Information Following services are provided Moxa Internet ServicesSerial Number Problem Report FormProduct Return Procedure

EDS-510A, Moxa EtherDevice Switch specifications

Moxa Technologies is a leader in providing innovative networking solutions for industrial applications, and one of its standout products is the Moxa EtherDevice Switch, EDS-510A. This robust, managed Ethernet switch is specifically designed for reliable performance in challenging industrial environments, making it an ideal choice for various applications, including automation, transportation, and power generation.

The EDS-510A features five 10/100Base-TX Fast Ethernet ports, allowing flexibility in connecting multiple devices. Additionally, it offers two Gigabit Ethernet ports for uplink, enabling high-speed connections to aggregation switches or routers. The switch supports both redundant power inputs and a wide operating temperature range of -40 to 75 degrees Celsius, ensuring continuity of service even in extreme conditions.

One of the key features of the EDS-510A is its support for IEEE 802.3at PoE (Power over Ethernet). This technology allows the switch to deliver power to connected devices such as IP cameras and wireless access points through the Ethernet cable, which simplifies installation and reduces the need for additional power sources. This is especially beneficial in remote locations where power availability may be limited.

The EDS-510A is also equipped with advanced management features that include VLAN support, port mirroring, and QoS (Quality of Service) capabilities. These features enhance network performance and security, enabling users to prioritize critical traffic and segment the network for better control. Moreover, it supports SNMP (Simple Network Management Protocol), allowing for easy integration into existing network management systems.

Another notable characteristic is the switch's rugged design. With a metal housing that provides excellent EMI (Electromagnetic Interference) protection, the EDS-510A can withstand harsh industrial environments. It is also compliant with various industrial standards, reinforcing its suitability for mission-critical applications.

In summary, the Moxa EtherDevice Switch, EDS-510A, is engineered to meet the demands of modern industrial networking. With its combination of PoE capability, advanced management features, and rugged design, it ensures reliable and efficient network performance, making it an excellent choice for organizations looking to enhance their industrial networking infrastructure. Whether deployed in factories, transportation systems, or utility environments, the EDS-510A continues to be a trusted solution for numerous applications.
Top Page Image Contents