Moxa Technologies Moxa EtherDevice Switch, EDS-510A Copyright Notice, Trademarks, Disclaimer

Page 2

Moxa EtherDevice™ Switch

EDS-510A Series User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Copyright Notice

Copyright ♥ 2006 Moxa Networking Co., Ltd.

All rights reserved.

Reproduction without permission is prohibited.

Trademarks

Moxa is a registered trademark of the Moxa Group.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Moxa EtherDevice Switch EDS-510A Series User’s Manual First Edition, OctoberDisclaimer Copyright NoticeTrademarks Table of Contents Chapter EDS Configurator GUI Introduction Overview Package ChecklistFeatures Industrial Networking CapabilityUseful Utility and Remote Configuration Recommended Software and AccessoriesGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-510A Series User’s Manual Key Function Configuration using a Telnet Console Configuration using a Web Browser EDS-510A Series User’s Manual Disabling Telnet and Browser Access Featured Functions Configuring Basic Settings System IdentificationAccount PasswordPassword Any host can access the EDS-510A Accessible IPAny host on a specific subnetwork can access the EDS-510A Allowable Hosts Input formatDescription EnablePort NameFDX Flow Ctrl NetworkSpeed Switch Subnet Mask Auto IP ConfigurationSwitch IP Address Default GatewayCurrent Date TimeCurrent Time System Up TimeTime Server IP/Name Turbo Ring DIP SwitchTime zone before setting the time Time Server Query PeriodDIP Switch Hardware Configuration DIP Switch Turbo Ring DIP DescriptionTftp Server IP/Name System File Update-By Remote TftpConfiguration Files Path and Name Firmware Files Path and NameSystem File Update-By Local Import/Export System File Update-By Backup MediaRestart Using Port TrunkingFactory Default Port Trunking Concept Trunk Type Configuring Port TrunkingTrunk Group Maximum of 3 trunk groups Available Ports/Member Port Configuring SnmpSetting Description Trunk TableV1, V2c Write/Read Community Snmp VersionsV1, V2c Read Community Trap Settings 1st Trap Server IP/NameGigabit Ethernet Redundant Ring Capability 300 ms Using Communication RedundancyPrivate MIB information Initial Setup Turbo Ring ConceptWhen the number of EDS-510A units in the Turbo Ring is even Ring Coupling Configuring Turbo Ring STP/RSTP Concept What is STP? Following explanation uses bridge instead of switchPort Speed Path Cost 802.1D Edition 802.1w-2001 How STP WorksSTP Requirements STP CalculationDifferences between Rstp and STP STP ConfigurationSTP Reconfiguration STP ExampleUsing STP on a Network with Multiple VLANs Configuring STP/RSTP Root/Not RootProtocol of Redundancy Forwarding DelayEnable STP per Port Bridge priorityPort Cost Configuration Limits of RSTP/STPPort Priority Port StatusTraffic Prioritization Concept Using Traffic PrioritizationWhat is Traffic Prioritization? How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues Configuring Traffic PrioritizationQoS Classification Inspect TOS Queuing MechanismPort Highest Priority Inspect COSTOS/DiffServ Mapping Setting Description FactoryCoS Mapping Virtual LAN Vlan Concept Using Virtual LANWhat is a VLAN? Benefits of VLANsCommunication Between VLANs VLANs and Moxa EtherDevice SwitchManaging a Vlan VLANs Tagged and Untagged MembershipSample Applications of VLANs using Moxa EDS-510A DeviceConfiguring Virtual LAN Vlan SettingsPort Type Vlan ModeManagement Vlan ID Port PvidVlan Table PortConcept of Multicast Filtering Using Multicast FilteringWhat is an IP Multicast? Benefits of MulticastNetwork without multicast filtering Multicast Filtering and Moxa EtherDevice SwitchIgmp Internet Group Management Protocol Snooping Mode Gmrp Garp Multicast Registration Protocol Query ModeIgmp Multicast Filtering Static Multicast MACConfiguring Igmp Snooping Igmp Snooping SettingsAdd Static Multicast MAC Gmrp enable Using Bandwidth ManagementConfiguring Gmrp Gmrp TableStatic Port Lock Using Port Access ControlTraffic Rate Limiting Settings IeeeMessage Exchange Configuring Static Port Lock Configuring IeeeServer Port Database OptionRadius Server Shared Key802.1X Re-Authentication 802.1X Re-AuthenticationLocal User Database Setup Local User Database SetupPort Access Control Table Using Auto WarningConfiguring Email Warning Port Events Event TypeSystem Events Mail Server IP/Name Email SetupPassword Setting Account NameEmail Address Configuring Relay WarningEvent Setup Send Test EmailSystem Events Configuring Line-Swap Fast Recovery Using Line-Swap-Fast-RecoveryUsing Set Device IP Override relay alarm settingsConfiguring Set Device IP Set up the connected devicesOutput data stream Using DiagnosisMirror Port Bi-directionalPing Using MonitorMonitor by Switch Using the MAC Address Table Monitor by PortUsing Event Log MACSyslog Settings Using SyslogUsing HTTPS/SSL EDS-510A Series User’s Manual Featured Functions EDS Configurator GUI Starting EDS Configurator Broadcast SearchSearch by IP address Upgrade Firmware Modify IP AddressExport Configuration Import Configuration Unlocked Unlock ServerLocked BlankUnlocked Fixed FixedLocked Fixed MIB Groups MIB II.17 dot1dBridge Group MIB II.10 Transmission GroupMIB II.11 Snmp Group Public Traps Private TrapsInterface SpecificationsTechnology Regulatory Approvals MechanicalEnvironmental Service Information Moxa Internet Services Following services are providedProblem Report Form Serial NumberProduct Return Procedure

EDS-510A, Moxa EtherDevice Switch specifications

Moxa Technologies is a leader in providing innovative networking solutions for industrial applications, and one of its standout products is the Moxa EtherDevice Switch, EDS-510A. This robust, managed Ethernet switch is specifically designed for reliable performance in challenging industrial environments, making it an ideal choice for various applications, including automation, transportation, and power generation.

The EDS-510A features five 10/100Base-TX Fast Ethernet ports, allowing flexibility in connecting multiple devices. Additionally, it offers two Gigabit Ethernet ports for uplink, enabling high-speed connections to aggregation switches or routers. The switch supports both redundant power inputs and a wide operating temperature range of -40 to 75 degrees Celsius, ensuring continuity of service even in extreme conditions.

One of the key features of the EDS-510A is its support for IEEE 802.3at PoE (Power over Ethernet). This technology allows the switch to deliver power to connected devices such as IP cameras and wireless access points through the Ethernet cable, which simplifies installation and reduces the need for additional power sources. This is especially beneficial in remote locations where power availability may be limited.

The EDS-510A is also equipped with advanced management features that include VLAN support, port mirroring, and QoS (Quality of Service) capabilities. These features enhance network performance and security, enabling users to prioritize critical traffic and segment the network for better control. Moreover, it supports SNMP (Simple Network Management Protocol), allowing for easy integration into existing network management systems.

Another notable characteristic is the switch's rugged design. With a metal housing that provides excellent EMI (Electromagnetic Interference) protection, the EDS-510A can withstand harsh industrial environments. It is also compliant with various industrial standards, reinforcing its suitability for mission-critical applications.

In summary, the Moxa EtherDevice Switch, EDS-510A, is engineered to meet the demands of modern industrial networking. With its combination of PoE capability, advanced management features, and rugged design, it ensures reliable and efficient network performance, making it an excellent choice for organizations looking to enhance their industrial networking infrastructure. Whether deployed in factories, transportation systems, or utility environments, the EDS-510A continues to be a trusted solution for numerous applications.
Top Page Image Contents