Network Technologies SM-nXm-15V-LCD operation manual NTI Veemux Video Matrix Switch

Page 34

NTI VEEMUX VIDEO MATRIX SWITCH

5.Press <L> to load the firmware (hex) file. This will prepare the file for transfer to the VEEMUX. If the file fails to load, press the <C> key to clear the old firmware, and press <L> to load it again.

6.When the message “Start sending file via Xmodem protocol..”' appears, the VEEMUX is waiting for the Firmware file to be uploaded.

A box or some other characters may be displayed repeatedly on the line below this message while the VEEMUX waits; this is normal.

7.Click “Transfer” > “Send File...” from the HyperTerminal menu bar

8.Select “Xmodem” from the Protocol drop-down menu,

9.Click “Browse”. Go to the directory containing the firmware to load into the VEEMUX. Select to highlight the hex file, click “Open”, then click “Send”.

10.A window will appear displaying information about the upload operation, including the upload process. It may take a few seconds for the upload to begin.

DO NOT DISRUPT POWER while the firmware is uploading to the VEEMUX.

11.When the upload is completed, the command prompt will return. Power the VEEMUX OFF, then ON again. Upgrading is complete, and the VEEMUX is ready to use.

30

Image 34

Contents SM-nXm-15V-LCD Trademark Table of Contents Table of Figures Supported Web Browsers IntroductionBasic Operation CompatibiltyCables Default User Name and PasswordsMaterials Materials Supplied with this kitPower ON/OFF switch Features and FunctionsFront View of SM-8X8-15V-LCD Installation Connect the Sources and MonitorsConnect RS232 9D-male RS232 connectorConnect to the Ethernet Power Up LED MatrixEscape back to the main display Used to enter numbers. # Control OptionsFront Panel LCD with Keypad Control Output user number can be enteredRS232 Control Scan ModeRemote Connection Unit Address Command ProtocolBaud Rate RS232 Matrix-Y-1 CPU Serial PortCommand Definitions Contd AutostatusMain Options SerTest- RS232 Interface Test ProgramMatrix Operations Setup Options Ethernet OperationsTelnet Interface Command Reply DescriptionEthernet Control Telnet 192.168.1.30Enter the Password Web InterfaceVideo Switch Web interface SwitchSetup Pages Web interface SetupWeb interface Serial Setup Video Input NamesScan Mode Output NamesUpdate Firmware Web interface Update FirmwareUpdate Web Server Change PasswordHelp Logout Web interface LogoutDevice Discovery Tool Device Discovery ToolKeypad Features And FunctionsInfrared Control LCD DisplayChange the Switch How To Use The IRTPower on with SYS, in or OUT keys Power on with 2 key Change Output Port Change Input PortSet Configuration IRT Troubleshooting Battery ReplacementSpecifications Insert 2 new AA cell batteriesDDC Support RS232 Upgrade of the Front Panel LCD Firmware Following will be neededNTI Veemux Video Matrix Switch RS232 Connection Cables Pinout of RS232 port on VeemuxPinout for Matrix Y-1 Cable Wiring Schematic of Matrix-Y-1 cableArrows indicate signal direction Rack Mounting InstructionsSpecifications NTI Desktop Size Rack Units Rack Size In. WxDxHWarranty Information TroubleshootingSafety Statements Index