NTI VEEMUX VIDEO MATRIX SWITCH
Ethernet Operations
Key Selection
1)Set Unit IP Address
2)Set Unit Subnet Mask
3)Set Unit Default Gateway
4)Set Unit Website Timeout
5)Read Unit IP Address
6)Read Unit Subnet Mask
7)Read Unit Default Gateway
8)Read Unit Website Timeout
Description
-enter the desired IP address in xxx.xxx.xxx.xxx format
-number of digits is minimum 1 and maximum 3 for each field. Leading zeroes are accepted
-enter the desired IP address in xxx.xxx.xxx.xxx format
-number of digits is minimum 1 and maximum 3 for each field. Leading zeroes are accepted
-enter the desired default gateway
-number of digits is minimum 1 and maximum 3 for each field. Leading zeroes are accepted
-set the website timeout; timeout = numeric string of timeout in seconds
- Values: 60, 300, 600, 900, 1800, 3600, 7200, 18000, 28800 0 = no timeout
-read the unit IP address in xxx.xxx.xxx.xxx format
-read the unit subnet mask in xxx.xxx.xxx.xxx format
-read the unit default gateway in xxx.xxx.xxx.xxx format
-read the current website timeout period in seconds
- Values: 60, 300, 600, 900, 1800, 3600, 7200, 18000, 28800 0 = no timeout
Setup Options
Key Selection
1)select Com port current: (COM1:)
2)select Baud rate current: (9600)
3)set unit Address current:
(1)
Description
-select PC serial port
-the current PC serial port is displayed in parentheses
-select PC serial port baud rate
-the current baud rate is displayed in parentheses
-select the unit address
-the current address is displayed in parentheses
For any selection that requires user input, the user is prompted. When commands are sent to the matrix unit, the command string and matrix unit responses are echoed to the screen. All commands generated by the program are formatted according to the information provided in sections above. If any transmission problems are detected, an error message is displayed.
Press <Esc> or <Enter> to back out to the main menu and press again to exit.
12