NTI VEEMUX VIDEO MATRIX SWITCH
Pinout for Matrix Y-1 Cable
Wiring Schematic of Matrix-Y-1 cable
9D Male | 9D Female | 9D Male |
|
(Unit #1) | (Source) | (Unit #2) | |
2 |
| 3 |
|
3 | 3 |
| Not connected to |
5 | 5 | 5 | source connector |
| |||
22
7
8 Jumper
1
4Jumpers
Arrows indicate signal direction.
RACK MOUNTING INSTRUCTIONS
This NTI switch was designed to be directly mounted to a rack. It includes a mounting flange to make attachment easy.
Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch. Then secure the NTI switch to the rack using four
Do not block power supply vents in the NTI switch chassis (if provided). Be sure to enable adequate airflow in front of and behind the NTI switch.
Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.
10-32 
Rack Screws 
(supplied) 
Rack
Cage Nuts (supplied)
32