Paradyne Routers Exiting from the System, Using the List Command, Changing the System Identity

Accessing the DSL Router

Using the List Command

The list command displays a sequence of commands, in the form of ASCII strings, that would have the effect of setting all configuration settings to the current values. (The two passwords are not output.)

To determine the commands available, enter the Administrator configuration mode and enter either:

Hlist

Displays the output in on-screen page mode. In on-screen page mode, the user interface displays 23 lines of information. When the 24th line is reached, More... is displayed. Pressing any key will display the next page.

Hlist config

Displays the output in scroll mode as a text file. Scroll mode captures and displays all command strings in a text file for use with a terminal emulation program. Refer to Appendix D, DSL Router Terminal Emulation.

Changing the System Identity

"Procedure

To change the System Identity from the factory default of CUSTOMER>:

1.Login and enter the ADMIN-configuration mode.

2.At the CUSTOMER-CONFIG#> prompt, type the new System identity (no spaces allowed), press Enter, type save, and press Enter.

system identity new system identity

For example:

system identity PARADYNE and press Enter

save and press Enter

3.In this example, after saving the entry and ending the configuration mode, the System identity will display:

PARADYNE #>

The System identity is the same as the MIB entry of sysName. The sysContact and SysLocation MIB entries are not displayed.

Exiting from the System

You can manually log out of the system, or let the system automatically log you out. The DSL router will log you out immediately if you disconnect the Console cable. Any unsaved configuration input will be lost.

6371-A2-GB20-10 August 2000 2-5