Paradyne Routers Setting Up the New Users Login, Invalid Characters Value Ascii Hex Translation

Accessing the DSL Router

Setting Up the New User's Login

The DSL router will provide the login prompt when the local console connection is first established. When the login prompt appears, a locally connected console defaults to Console Enabled with Operator access only.

"Procedure

For first-time access to the Hotwire DSL Router's command line interface:

1.At the initial login> prompt, type the default login ID paradyne and press Enter.

2.At the password> prompt (for Operator), type the default password abc123 and press Enter.

The login ID and password fields are validated together.

3.At the system identity of CUSTOMER> prompt, type admin enable and press Enter.

4.At the password> prompt (for Administrator), type the default password abc123 and press Enter.

5.The system identity will change to the Administrator display mode of

CUSTOMER#>. Type configure terminal and press Enter.

6.The system identity will change to the Administrator configuration mode of

CUSTOMER - CONFIG#>.

7.To change the login ID, enter text to replace the default of paradyne:

name your new login ID

NOTE:

The Login ID and Password fields are NOT case-sensitive.

8.Enter a new password and specify the level: password level password

Example: type password operator 238clrd3 and press Enter.

Both the Login ID and the Password fields are 1±31 printable alphanumeric ASCII characters in the ASCII hex range of 0x21±0x7E. No spaces are allowed. The following table lists the invalid characters.

Invalid Characters	Value	ASCII Hex Translation
#	Number sign	0x23
$	Dollar sign	0x24
%	Percentage	0x25
&	Ampersand	0x26

6371-A2-GB20-10 August 2000 2-3