Paradyne Routers manual Health and Status MIB, DevStatus1

Traps & MIBs

Health and Status MIB

Objects supported by the Health and Status MIB, pdn_HealthAndStatus.mib, include the following groups:

HDevice Health and Status

HDevice Selftest Status

HDevice Abort Status

HDevice Failure Status

HTraps

Table C-9. Device Status Group Objects Table

Object	Description	Setting/Contents
devHealthandStatus	This object displays alarm	Possible alarms are:
(devStatus1)	messages if any alarms are	H Alarm: Management Address Conflict.
	generated by the device.
		H Alarm: Failed Selftest.
		H Alarm: System Error.
		H No alarm is set.
devSelfTestResults	This object corresponds to	H P ± Passed selftest.
(devStatus 2)	self-test results. This value is	H F ± Failed selftest.
	used as a binding for
	devSelfTestFailure Trap.
devAbortStatus	This object is used to retrieve	Possible abort codes are:
(devStatus 3)	the latest abort status that is	H INVALID_INTR
	stored in the agent.
		H INT_TIMEOUT
		H O_YAMOS_FAILURE
		H INIT_NOBUFS
		H SYSCALL_FAILED
		H G_NO_BUF
		H G_BAD_CONFIG
		H G_NO_ABORT
devFailureStatus	This object is used to retrieve	This value is used as a binding for the deviceFailure trap.
(devStatus 4)	the latest failure status.
devStatusTrapEnable	Allows user to enable or	Bit Sum.
(devStatus 8)	disable the selftest failure	H 1 ± devSelfTest failure.
	indication trap and the device
	failure indication trap	H 2 ± device failure.
	individually.
devStatusTestFailure	Signifies that the sending	The variable binding for this trap is the
	protocol's device failed selftest.	devSelfTestResults object of the Health and Status MIB.
deviceFailure	Signifies that the sending	The reason for the failure was not selftest.
	protocol's device failed.

6371-A2-GB20-10 August 2000 C-15