Quatech QSC(LP)-100 user manual Windows

Page 15

5.2Windows 2000

1.After inserting a QSC(LP)-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "OK" button.

2.The following dialog box will appear. Insert the Quatech COM CD (shipped with the device). Click the "OK" button.

3.The following dialog box will display the appropriate INF file on the CD in the drive. Click the "OK" button.

4.Window will copy the INF file from the CD and display a final dialog indication that the process is complete. Click the "Finish" button.

QSC(LP)-100 User's Manual

15

Image 15
Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Enhanced Serial Adapter Identification Enable Scratchpad Register SPAD, J2Address Map and Special Registers Base Address and Interrupt Level IRQGeneral Information Factory Default Configuration Hardware ConfigurationClock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationsWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal INTA# PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingQSCLP-100 Revision November