Quatech QSC(LP)-100 user manual

Page 26

8.Click the "Port Settings" tab and then click the "Advanced" button. The QSC(LP)-100 driver will display a custom Advanced Port Settings control, which allows the ports UART compatibility mode and FIFO threshold levels to be configured. The threshold values of full-scale for the transmit buffer and ¾-scale for the receive buffer are optimal for most applications. Note that the FIFO option for each of the QSC(LP)-100's four ports is configured independently.

QSC(LP)-100 User's Manual

Image 26

Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Base Address and Interrupt Level IRQ Enable Scratchpad Register SPAD, J2Address Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Hardware Configuration Factory Default ConfigurationForce High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upQSCLP-100 Revision November