Quatech QSC(LP)-100 user manual Four-Port RS-232 Serial Adapter

Page 22

5.6.1 Changing Resource Settings with Device Manager

1. Start the Windows 95/98/ME Device Manager.

2.Double click on the hardware class Multi-Port Serial Adapters to list hardware devices in the class.

3.The QSC(LP)-100 “parent device” belongs to this hardware class. The full device name for the QSC(LP)-100 is Quatech QSC(LP)-100:

Four-Port RS-232 Serial Adapter.

QSC(LP)-100 User's Manual

22

Image 22

Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Base Address and Interrupt Level IRQ Enable Scratchpad Register SPAD, J2Address Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Hardware Configuration Factory Default ConfigurationForce High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upQSCLP-100 Revision November