Quatech QSC(LP)-100 user manual Windows Configurations, Windows Millennium

Page 14

5 Windows Configurations

5.1Windows Millennium

1.After inserting the QSC(LP)- 100 for the first time the "Add New Hardware Wizard" will begin. Select "Search for the best driver for your device.". Check the "Removable media" and "Specify location" box. Click the "Next" button.

2.Window will locate the proper INF file and copy the file from the CD. Click the "Next" button.

3.The final dialog screen will verify the file copy from the CD.

Click the "Finish" button.

QSC(LP)-100 User's Manual

14

Image 14

Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Base Address and Interrupt Level IRQ Enable Scratchpad Register SPAD, J2Address Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Hardware Configuration Factory Default ConfigurationForce High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upQSCLP-100 Revision November