Quatech QSC(LP)-100 user manual Specifications, ICL3245CA

Page 34

9 Specifications

Bus interface:	PCI, 32-bit bus, Universal Voltage Signaling
	IBM-compatible computers
Dimensions:	approx. 5.0" x 3.7"
Serial ports
Controller:	16550 with 16-byte FIFOs
Interface:	One female D-44 connector
	Four male D-9 connectors
	using adapter cable
Transceivers:	ICL3245CA
	High-level output:	+5V min
	Low-level output:	-5V max,
	Switching speed
Power requirements	+5.0 volts: approx. 250 mA
	+5.0 volts: approx. 250 mA
Temperature:	operating 0° to 70°
	storage -50° to 80°
Humidity:	10% to 90%

QSC(LP)-100 User's Manual

34

Image 34

Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Base Address and Interrupt Level IRQ Enable Scratchpad Register SPAD, J2Address Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Hardware Configuration Factory Default ConfigurationForce High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upQSCLP-100 Revision November