2.Select the radio button for "Driver from disk provided by hardware manufacturer." Click the "OK" button to continue.
3.An "Install From Disk" dialog box should pop up. Insert the disk with the Quatech INF files on it, select the correct drive letter, and click the "OK" button. Windows 95 automatically browses the root directory for an INF file that defines configurations for
4.The "New Hardware Found" dialog box will appear again, this time for an "Unknown Device."
5.Again select the radio button for "Driver from disk provided by hardware manufacturer." Click the "OK" button to continue.
6.Another "Install From Disk" dialog box will pop up. The path should already be pointing to the Quatech disk. Click the "OK" button to continue.
7.You should now see the "Copying Files" dialog box as Windows 95 copies the driver files from the disk..
8.The installation utility will ask for your Windows 95 installation disks. Serial communication ports require two drivers supplied by Microsoft to function: SERIAL.VXD and SERIALUI.DLL. Insert the disk or CD and click "OK".
NOTE:
You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click "OK" anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory.
9.The "New Hardware Found" dialog will repeat for each of the serial ports on the
10.Installation is complete.
5.6Viewing Resources with Device Manager
18 |