Quatech QSC(LP)-100 user manual QTPCI.EXE Expert Mode display

Page 30

Figure 15 shows the Expert Mode display for the QSC(LP)-100 after the "Q" key has been pressed. The information from the Basic Mode display is presented along with more details such as the Vendor and Device IDs, PCI Class Code, size of memory and I/O regions, etc. Pressing the "N" key will show similar information for all non-Quatech PCI devices in the system, including those devices integrated on the motherboard. In this example, the "Base addr 0" resource is reserved.

For users interested in even more details, PCI BIOS information can be displayed by pressing the "B" key. Pressing the "I" key displays thePCI interrupt routing table.

Figure 15 --- QTPCI.EXE Expert Mode display

QSC(LP)-100 User's Manual

30

Image 30

Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Base Address and Interrupt Level IRQ Enable Scratchpad Register SPAD, J2Address Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Hardware Configuration Factory Default ConfigurationForce High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upQSCLP-100 Revision November