Quatech QSC(LP)-100 user manual

Page 19

The following instructions provide step-by-step instructions on viewing resources used by the QSC(LP)-100 in Windows using the "Device Manager" utility. Select StartHelp from within Windows for additional information on this utility.

1.Double click the "System" icon inside the Control Panel folder. This opens up the System Properties box.

2.Click the "Device Manager" tab located along the top of the System Properties box. This lists all hardware devices registered inside the Windows registry. Additional information is available on any of these devices by click on the device name and then selecting the "Properties" button.

3.Double click the device group "Multi-function Adapters". The QSC(LP)-100 model name should appear in the list of Multi-function adapters.

4.Double click the QSC(LP)-100 model name and a properties box should open for the hardware adapter.

5.Click the "Resources" tab located along the top of the properties box to view the resources Windows has allocated for the QSC(LP)-100 match the hardware configuration. Because PCI is a true plug-and-play bus, do not attempt to modify the configuration values listed. Click "Cancel" to exit without making changes.

QSC(LP)-100 User's Manual

19

Image 19
Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Enhanced Serial Adapter Identification Enable Scratchpad Register SPAD, J2Address Map and Special Registers Base Address and Interrupt Level IRQGeneral Information Factory Default Configuration Hardware ConfigurationClock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationsWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal INTA# PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingQSCLP-100 Revision November