Quatech QSC(LP)-100 user manual Using the New Hardware Found Wizard

Page 17

4.The following dialog box will display the appropriate INF file on the diskette in the drive. Click the "Next" button.

5.Window will copy the INF file from the diskette and display a final dialog indication that the process is complete. Click the "Finish" button.

5.4Windows 95

Windows 95 maintains a registry of all known hardware installed in your computer. Inside this hardware registry Windows 95 keeps track of all of your system resources, such as I/O locations, IRQ levels, and DMA channels. The "Add New Hardware Wizard" utility in Windows 95 was designed to add new hardware and update this registry.

An "INF" configuration file is included with the QSC(LP)-100 to allow easy configuration in the Windows 95 environment.

5.5 Using the "New Hardware Found" Wizard

The following instructions provide step-by-step instructions on installing the QSC(LP)-100 in Windows 95 using the "New Hardware Found" wizard.

1.After booting the computer with a newly-installed QSC(LP)-100, the "New Hardware Found" dialog box will appear. If you have never installed a Quatech PCI communications adapter before, the dialog box may simply indicate that it has found a "PCI Card."

QSC(LP)-100 User's Manual

17

Image 17
Contents QSCLP-100 Warranty Information Iii Declaration of Conformity Address Map and Special Registers Enable Scratchpad Register SPAD, J2Base Address and Interrupt Level IRQ Enhanced Serial Adapter IdentificationGeneral Information Factory Default Configuration Hardware ConfigurationClock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationsWindows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Four-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page Windows NT Other Operating SystemsOS/2 DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal INTA# PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingQSCLP-100 Revision November