Quatech SSP-200, SSP-300 user manual

Quatech SSP-200, SSP-300 user manual Table of Contents Quatech SSP-300, SSP-200 user manual Introduction Quatech SSP-200, SSP-300 user manual This page intentionally left blank Quatech SSP-300, SSP-200 user manual DOS/Windows Quatech SSP-300 user manual SSP-200/300 Client Driver for DOS, Client Driver Installation Quatech SSP-300, SSP-200 user manual Command Line Options, Baddress Quatech SSP-300 user manual Device = C\SSP-200\ SSP231CL.SYS Quatech SSP-300, SSP-200 user manual Quatech SSP-200, SSP-300 user manual Common Problems, Generic Client Drivers Quatech SSP-300 user manual SSP-200/300 Enabler for DOS, Available Resources, Multiple Configuration Attempts Quatech SSP-200, SSP-300 user manual R option is not used Quatech SSP-300, SSP-200 user manual Quatech SSP-200, SSP-300 user manual Quatech SSP-300, SSP-200 user manual Memory Range Exclusion, Socket Numbers, Card and Socket Services Software Quatech SSP-200, SSP-300 user manual Quatech SSP-300 user manual Windows 95/98/Millennium ME, Installing a SSP-200/300 Under Windows 95/98/ME Quatech SSP-200 1Viewing Resource Settings with Device Manager, 2Changing Resource Settings with Device Manager, PC Card Quatech SSP-300, SSP-200 user manual Isr Quatech SSP-200, SSP-300 user manual Auxout Quatech SSP-300, SSP-200 user manual Frequently Asked Questions, Basic Configuration List Not Available Quatech SSP-200, SSP-300 user manual This page intentionally left blank Quatech SSP-300 user manual Installing a SSP-200/300 Under Windows Quatech SSP-200, SSP-300 user manual Double click ‘Serial Port Adapters’ Double click ‘Drivers’ Quatech SSP-300, SSP-200 user manual Quatech SSP-300 user manual SSP-200/300 Resource Settings in Windows, Manager Quatech SSP-300, SSP-200 user manual Lpt Quatech SSP-200, SSP-300 user manual Viewing Resource Settings with Device Manager Quatech SSP-300, SSP-200 user manual Changing Resource Settings with Device Manager Quatech SSP-200, SSP-300 user manual Quatech SSP-300, SSP-200 user manual Data Rate Multiplier Quatech SSP-200, SSP-300 user manual Quatech SSP-300, SSP-200 user manual Quatech SSP-200, SSP-300 user manual Basic Auxiliary Range RS-422/485 Clock Scratch Quatech SSP-300, SSP-200 user manual Loopback Any RTS Controlled Quatech SSP-200, SSP-300 user manual Auxout Quatech SSP-300 user manual Windows NT, Installing SSP-200/300
Page 16

2.2.1.1Example 1 SSP231EN.EXE

In example 1, no command line argument is specified. The Enabler will report an error and display the proper usage of the command.

2.2.1.2Example 2 SSP231EN.EXE (s0,b300,i5)

In example 2, the Enabler will configure the SSP-200/300 in socket 0 with a base address of 300H and IRQ 5 using a configuration memory window at segment D000. The SSP-200/300 unit's RS-422/485 output drivers will always be enabled, and RTS-CTS modem control handshaking will be disabled.

2.2.1.3 Example 3

SSP231EN.EXE (i10,h,b340,s1)

In example 3, the Enabler will configure the SSP-200/300 in socket 1 with a base address of 340H and IRQ 10 using a configuration memory window at segment D000. The SSP-200/300's RS-422/485 output drivers will always be enabled, and RTS-CTS modem control handshaking will be enabled on the RS-422/485 auxiliary channel.

2.2.1.4 Example 4

SSP231EN.EXE (s0,b300,i3,wd8)

In example 4, the Enabler will configure the SSP-200/300 in socket 0 with a base address of 300H and IRQ 3 using a configuration memory window at segment D800. The SSP-200/300's RS-422/485 output drivers will always be enabled, and RTS-CTS modem control handshaking will be disabled.

2.2.1.5 Example 5

SSP231EN.EXE (o1,i5,b340,s1)

In example 2, the Enabler will configure the SSP-200/300 in socket 1 with a base address of 340H and IRQ 5 using a configuration memory window at segment D000. The SSP-200/300's RS-422/485 output drivers will be enabled and disabled via the DTR signal, and RTS-CTS modem control handshaking will be disabled

2-11

SSP-200/300 (Rev. I and later) User's Manual

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SSP-200/300 Warranty Information SSP-200/300Declaration of Conformity Standards to whichTable of Contents Introduction This page intentionally left blank DOS/Windows Client Driver Installation SSP-200/300 Client Driver for DOSCommand Line Options BaddressDevice = C\SSP-200\ SSP231CL.SYS Page Common Problems Generic Client DriversSSP-200/300 Enabler for DOS Multiple Configuration AttemptsOlder Versions of Card and Socket Services Available ResourcesR option is not used Page Page Memory Range Exclusion Card and Socket Services SoftwareSocket Numbers Page SSP-200/300 Resource Settings in Windows 95/98/ME Installing a SSP-200/300 Under Windows 95/98/MEWindows 95/98/Millennium ME 1Viewing Resource Settings with Device Manager 2Changing Resource Settings with Device ManagerStart the Windows 95/98/ME Device Manager PC CardISR Auxout Basic Configuration List Not Available Frequently Asked QuestionsBase I/O Address Resource Modification Not Allowed This page intentionally left blank Installing a SSP-200/300 Under Windows WindowsDouble click ‘Serial Port Adapters’ Double click ‘Drivers’ Page SSP-200/300 Resource Settings in Windows ManagerLPT Viewing Resource Settings with Device Manager Changing Resource Settings with Device Manager Page Data Rate Multiplier Page Page Basic Auxiliary Range RS-422/485 Clock Scratch 0012 Loopback Any RTS Controlled Auxout Installing SSP-200/300 Windows NTPage Page Page Hardware Information Auxiliary Channel ConfigurationAuxiliary Channel RTS-CTS Handshaking Auxiliary Channel Handshaking Disabled Half Duplex Operation OptionsPage Termination Resistors Recommended Termination Resistor ValuesThis page intentionally left blank External Connections SSP-200/300 Adapter CableThis page intentionally left blank Specifications SSP-200/300
Top Page Image Contents