Quatech SSP-200, SSP-300 user manual

Page 42

4.Complete the final steps of the installation, shut down Windows NT and then insert the PCMCIA Card and re-boot the computer.

Additional help is available online

The SSP-200/300 PC Card should now be configured. In the future, Windows NT will automatically recognize and configure the SSP-200/300.

Note: Windows NT does not support ‘Plug and Play’ for PCMCIA cards. The PCMCIA Card must be inserted prior to starting Windows NT and can not be removed and reinserted while Windows NT is running.

5-4	SSP-200/300 (Rev. I and later) User's Manual

Image 42

Contents SSP-200/300 Warranty Information SSP-200/300Declaration of Conformity Standards to whichTable of Contents Introduction This page intentionally left blank DOS/Windows Client Driver Installation SSP-200/300 Client Driver for DOSCommand Line Options BaddressDevice = C\SSP-200\ SSP231CL.SYS Page Common Problems Generic Client DriversOlder Versions of Card and Socket Services SSP-200/300 Enabler for DOSMultiple Configuration Attempts Available ResourcesR option is not used Page Page Card and Socket Services Software Memory Range ExclusionSocket Numbers Page Installing a SSP-200/300 Under Windows 95/98/ME SSP-200/300 Resource Settings in Windows 95/98/MEWindows 95/98/Millennium ME Start the Windows 95/98/ME Device Manager 1Viewing Resource Settings with Device Manager2Changing Resource Settings with Device Manager PC CardISR Auxout Frequently Asked Questions Basic Configuration List Not AvailableBase I/O Address Resource Modification Not Allowed This page intentionally left blank Installing a SSP-200/300 Under Windows WindowsDouble click ‘Serial Port Adapters’ Double click ‘Drivers’ Page SSP-200/300 Resource Settings in Windows ManagerLPT Viewing Resource Settings with Device Manager Changing Resource Settings with Device Manager Page Data Rate Multiplier Page Page Basic Auxiliary Range RS-422/485 Clock Scratch 0012 Loopback Any RTS Controlled Auxout Installing SSP-200/300 Windows NTPage Page Page Auxiliary Channel Configuration Hardware InformationAuxiliary Channel RTS-CTS Handshaking Auxiliary Channel Handshaking Disabled Half Duplex Operation OptionsPage Termination Resistors Recommended Termination Resistor ValuesThis page intentionally left blank External Connections SSP-200/300 Adapter CableThis page intentionally left blank Specifications SSP-200/300