Quatech SSP-300, SSP-200 user manual Changing Resource Settings with Device Manager

Page 31

6.Use the COM Port device names (COM5, COM6, etc.) to access any of the particular serial ports on the SSP-200/300. This name is required by a Windows 2000 application when accessing a particular port.

4.2.2 Changing Resource Settings with Device Manager

1.Start the Windows 2000 Device Manager.

2.Double click on the hardware class Quatech Multiport Serial Devices to list hardware devices in the class.

3.The SSP-200/300 “parent device” belongs to this hardware class. The device name for the SSP-200/300 is Quatech SSP-200/300 PCMCIA RS-422/RS-485 Serial Adapter.

4.Open the Properties dialog for the SSP-200/300 device, then click the Advanced tab to view the clock rate settings.

Windows 2000

4-8

Image 31
Contents SSP-200/300 SSP-200/300 Warranty InformationStandards to which Declaration of ConformityTable of Contents Introduction This page intentionally left blank DOS/Windows SSP-200/300 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\SSP-200\ SSP231CL.SYS Page Generic Client Drivers Common ProblemsAvailable Resources SSP-200/300 Enabler for DOSMultiple Configuration Attempts Older Versions of Card and Socket ServicesR option is not used Page Page Memory Range Exclusion Card and Socket Services SoftwareSocket Numbers Page SSP-200/300 Resource Settings in Windows 95/98/ME Installing a SSP-200/300 Under Windows 95/98/MEWindows 95/98/Millennium ME PC Card 1Viewing Resource Settings with Device Manager2Changing Resource Settings with Device Manager Start the Windows 95/98/ME Device ManagerISR Auxout Basic Configuration List Not Available Frequently Asked QuestionsBase I/O Address Resource Modification Not Allowed This page intentionally left blank Windows Installing a SSP-200/300 Under WindowsDouble click ‘Serial Port Adapters’ Double click ‘Drivers’ Page Manager SSP-200/300 Resource Settings in WindowsLPT Viewing Resource Settings with Device Manager Changing Resource Settings with Device Manager Page Data Rate Multiplier Page Page Basic Auxiliary Range RS-422/485 Clock Scratch 0012 Loopback Any RTS Controlled Auxout Windows NT Installing SSP-200/300Page Page Page Hardware Information Auxiliary Channel ConfigurationAuxiliary Channel RTS-CTS Handshaking Auxiliary Channel Handshaking Disabled Options Half Duplex OperationPage Recommended Termination Resistor Values Termination ResistorsThis page intentionally left blank SSP-200/300 Adapter Cable External ConnectionsThis page intentionally left blank Specifications SSP-200/300