Quatech SSP-300 user manual Installing a SSP-200/300 Under Windows

Page 25

4 Windows 2000

To allow easy configuration of the SSP-200/300, an Windows 2000 "INF" configuration file has been written for the hardware. This configuration file supports the SSP-200/300 in both addressing modes: block mode and “com” mode. Additionally, the RTS-CTS modem control handshake option and the RS-422/485 output driver enable option for full and half duplex operation is supported.

4.1Installing a SSP-200/300 Under Windows 2000.

1.Insert the Quatech COM CD into an available CD-ROM.

2.Insert the SSP-200/300 into any available PC Card socket.

3.You woll be promted to search for the correct driver. Choose the drive where the Quatech COM CD is located and select ‘Brwose’ from the ‘Files Needed ‘ windows.

Windows 2000

4-2

Image 25
Contents SSP-200/300 SSP-200/300 Warranty InformationStandards to which Declaration of ConformityTable of Contents Introduction This page intentionally left blank DOS/Windows SSP-200/300 Client Driver for DOS Client Driver InstallationBaddress Command Line OptionsDevice = C\SSP-200\ SSP231CL.SYS Page Generic Client Drivers Common ProblemsMultiple Configuration Attempts SSP-200/300 Enabler for DOSOlder Versions of Card and Socket Services Available ResourcesR option is not used Page Page Memory Range Exclusion Card and Socket Services SoftwareSocket Numbers Page SSP-200/300 Resource Settings in Windows 95/98/ME Installing a SSP-200/300 Under Windows 95/98/MEWindows 95/98/Millennium ME 2Changing Resource Settings with Device Manager 1Viewing Resource Settings with Device ManagerStart the Windows 95/98/ME Device Manager PC CardISR Auxout Basic Configuration List Not Available Frequently Asked QuestionsBase I/O Address Resource Modification Not Allowed This page intentionally left blank Windows Installing a SSP-200/300 Under WindowsDouble click ‘Serial Port Adapters’ Double click ‘Drivers’ Page Manager SSP-200/300 Resource Settings in WindowsLPT Viewing Resource Settings with Device Manager Changing Resource Settings with Device Manager Page Data Rate Multiplier Page Page Basic Auxiliary Range RS-422/485 Clock Scratch 0012 Loopback Any RTS Controlled Auxout Windows NT Installing SSP-200/300Page Page Page Hardware Information Auxiliary Channel ConfigurationAuxiliary Channel RTS-CTS Handshaking Auxiliary Channel Handshaking Disabled Options Half Duplex OperationPage Recommended Termination Resistor Values Termination ResistorsThis page intentionally left blank SSP-200/300 Adapter Cable External ConnectionsThis page intentionally left blank Specifications SSP-200/300