Quatech SSP-200, SSP-300 user manual Auxout

Page 22

0015	Clocking	Any	DTR Controlled	Normal	ISR
0016	Handshaking	Any	Auto Toggle	8x	ISR
0017	Clocking	Any	Auto Toggle	8x	ISR
0018	Handshaking	Any	RTS Controlled	8x	ISR
0019	Clocking	Any	RTS Controlled	8x	ISR
001A	Handshaking	Any	DTR Controlled	8x	ISR
001B	Clocking	Any	DTR Controlled	8x	ISR
001C	Loopback	Any	Always Enabled	Normal	Scratch Pad
001D	Loopback	Any	Always Enabled	8x	Scratch Pad
001E	Loopback	Any	Auto Toggle	Normal	Scratch Pad
001F	Loopback	Any	RTS Controlled	Normal	Scratch Pad
0020	Loopback	Any	DTR Controlled	Normal	Scratch Pad
0021	Handshaking	Any	Always Enabled	Normal	Scratch Pad
0022	Clocking	Any	Always Enabled	Normal	Scratch Pad
0023	Loopback	Any	Auto Toggle	8x	Scratch Pad
0024	Loopback	Any	RTS Controlled	8x	Scratch Pad
0025	Loopback	Any	DTR Controlled	8x	Scratch Pad
0026	Handshaking	Any	Always Enabled	8x	Scratch Pad
0027	Clocking	Any	Always Enabled	8x	Scratch Pad
0028	Handshaking	Any	Auto Toggle	Normal	Scratch Pad
0029	Clocking	Any	Auto Toggle	Normal	Scratch Pad
002A	Handshaking	Any	RTS Controlled	Normal	Scratch Pad
002B	Clocking	Any	RTS Controlled	Normal	Scratch Pad
002C	Handshaking	Any	DTR Controlled	Normal	Scratch Pad
002D	Clocking	Any	DTR Controlled	Normal	Scratch Pad
002E	Handshaking	Any	Auto Toggle	8x	Scratch Pad
002F	Clocking	Any	Auto Toggle	8x	Scratch Pad
0030	Handshaking	Any	RTS Controlled	8x	Scratch Pad
0031	Clocking	Any	RTS Controlled	8x	Scratch Pad
0032	Handshaking	Any	DTR Controlled	8x	Scratch Pad
0033	Clocking	Any	DTR Controlled	8x	Scratch Pad

*Indicates “COM” mode addressing. Addresses 3F8, 2F8, 3E8, and 2E8 are the standard addresses for COM1, COM2, COM3, and COM4, respectively. Windows 95/98/ME enumerates any COM port at a non-standard address starting with COM5.

**Handshaking indicates RTS routed to AUXOUT, AUXIN routed to CTS, and TCLK routed to RCLK. Loopback indicates RTS routed to CTS, AUXIN routed to AUXOUT, and TCLK routed to RCLK. Clocking indicates RTS routed to CTS, AUXIN routed to RCLK, and TCLK routed to

AUXOUT.

***Any indicates variable value; this value may or may not be user selectable depending on platform.

6.Select a Basic Configurations that displays "No conflicts" in the bottom display region titled Conflicting Device List from the drop down list. Some applications may not be able to access ports higher than COM4. To use the

3-4	SSP-200/300 (Rev. I and later) User's Manual

Image 22

Contents SSP-200/300 Warranty Information SSP-200/300Declaration of Conformity Standards to whichTable of Contents Introduction This page intentionally left blank DOS/Windows Client Driver Installation SSP-200/300 Client Driver for DOSCommand Line Options BaddressDevice = C\SSP-200\ SSP231CL.SYS Page Common Problems Generic Client DriversOlder Versions of Card and Socket Services SSP-200/300 Enabler for DOSMultiple Configuration Attempts Available ResourcesR option is not used Page Page Memory Range Exclusion Card and Socket Services SoftwareSocket Numbers Page SSP-200/300 Resource Settings in Windows 95/98/ME Installing a SSP-200/300 Under Windows 95/98/MEWindows 95/98/Millennium ME Start the Windows 95/98/ME Device Manager 1Viewing Resource Settings with Device Manager2Changing Resource Settings with Device Manager PC CardISR Auxout Basic Configuration List Not Available Frequently Asked QuestionsBase I/O Address Resource Modification Not Allowed This page intentionally left blank Installing a SSP-200/300 Under Windows WindowsDouble click ‘Serial Port Adapters’ Double click ‘Drivers’ Page SSP-200/300 Resource Settings in Windows ManagerLPT Viewing Resource Settings with Device Manager Changing Resource Settings with Device Manager Page Data Rate Multiplier Page Page Basic Auxiliary Range RS-422/485 Clock Scratch 0012 Loopback Any RTS Controlled Auxout Installing SSP-200/300 Windows NTPage Page Page Hardware Information Auxiliary Channel ConfigurationAuxiliary Channel RTS-CTS Handshaking Auxiliary Channel Handshaking Disabled Half Duplex Operation OptionsPage Termination Resistors Recommended Termination Resistor ValuesThis page intentionally left blank External Connections SSP-200/300 Adapter CableThis page intentionally left blank Specifications SSP-200/300