Quatech DSCLP/SSCLP-100 user manual Windows Configurations, Windows Millennium

Page 14

5 Windows Configurations

5.1Windows Millennium

1.After inserting the DSCLP-100 for the first time the "Add New Hardware Wizard" will begin. Select "Search for the best driver for your device.". Check the "Removable media" and "Specify location" box. Click the "Next" button.

2.Window will locate the proper INF file and copy the file from the CD. Click the "Next" button.

3.The final dialog screen will verify the file copy from the CD.

Click the "Finish" button.

14	DSCLP/SSCLP-100 User's Manual

Image 14

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Base Address and Interrupt Level IRQ Windows ConfigurationsAddress Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Enable Scratchpad Register SPAD, J2 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Hardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map SSCLP-100Specifications ICL3245CAPage Troubleshooting Computer will not boot upDSCLP/SSCLP-100