Quatech DSCLP/SSCLP-100 user manual

Page 19

NOTE:

You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click "OK" anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory.

9.The "New Hardware Found" dialog will repeat for each of the serial ports on the DSCLP-100 as each port is registered with Windows 95.

10.Installation is complete.

19	DSCLP/SSCLP-100 User's Manual

Image 19

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Enhanced Serial Adapter Identification Windows ConfigurationsAddress Map and Special Registers Base Address and Interrupt Level IRQGeneral Information Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J2 Clock multiplier jumper options Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal SSCLP-100 PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingDSCLP/SSCLP-100