Quatech DSCLP/SSCLP-100 user manual PCI Resource Map

Page 34

8 PCI Resource Map

Listed below are the PCI resources used by the DSCLP-100. Such information may be of use to customers writing their own device drivers or other custom software. A detailed description of the DSCLP-100's UARTs is available on the Quatech web site.

(all numbers in hex)
PCI Vendor ID:	0x135C	Quatech, Inc.
PCI Device ID:	0x0180	DSCLP-100
PCI Device ID:	0x0190	SSCLP-100
PCI Class Code
Base class:	0x07	Simple communications controller
Subclass:	0x02	Multiport serial controller
Interface:	0x00
IRQ sourced by:	INTA#
Base address 0:	0x80 bytes Mem	Reserved region
Base address 1:	0x80 bytes I/O	Reserved region
Base address 2:	0x10 bytes I/O	Serial ports(DSCLP-100)
		Port 1 at offset 0x00
		Port 2 at offset 0x08(DSCLP-100)

34	DSCLP/SSCLP-100 User's Manual

Image 34

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Base Address and Interrupt Level IRQ Windows ConfigurationsAddress Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J2 Clock multiplier jumper options Hardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map SSCLP-100Specifications ICL3245CAPage Troubleshooting Computer will not boot upDSCLP/SSCLP-100