Quatech DSCLP/SSCLP-100 user manual

Page 22

Figure 13 --- Windows Device Manager

9.Use the Logical COM Port names to access the serial ports on your DSCLP-100 through your software applications. Note: The Logical COM Port name is assigned to your ports by Windows . This name is required by a Windows application when accessing a particular port.

22	DSCLP/SSCLP-100 User's Manual

Image 22

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Base Address and Interrupt Level IRQ Windows ConfigurationsAddress Map and Special Registers Enhanced Serial Adapter IdentificationGeneral Information Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J2 Clock multiplier jumper options Hardware Installation Jumper/connector locationsPort Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page OS/2 Other Operating SystemsWindows NT DOS and other operating systemsQTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map SSCLP-100Specifications ICL3245CAPage Troubleshooting Computer will not boot upDSCLP/SSCLP-100