Quatech DSCLP/SSCLP-100 user manual Windows

Page 15

5.2Windows 2000

1.After inserting a DSCLP-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "OK" button.

2.The following dialog box will be displayed. Insert the Quatech COM CD (shipped with the device). Click the "OK" button.

3.The following dialog box will display the appropriate INF file on the CD in the drive. Click the "OK" button.

4.Window will copy the INF file from the CD and display a final dialog indication that the process is complete. Click the "Finish" button.

15	DSCLP/SSCLP-100 User's Manual

Image 15

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Enhanced Serial Adapter Identification Windows ConfigurationsAddress Map and Special Registers Base Address and Interrupt Level IRQGeneral Information Hardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J2 Clock multiplier jumper options Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal SSCLP-100 PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingDSCLP/SSCLP-100