Quatech DSCLP/SSCLP-100 user manual Specifications, ICL3245CA

Page 35

9 Specifications

Bus interface:	PCI, 32-bit bus, Universal Voltage Signaling
	IBM-compatible computers
Dimensions:	approx. 5.0" x 3.7"
Serial ports
Controller:	16550 with 16-byte FIFOs
Interface:	DSCLP: One male D-25 connector
	(Two male D-9 connectors
	using adapter cable.)
	SSCLP: one male D-9 connector.
Transceivers:	ICL3245CA
	High-level output:	+5V min
	Low-level output:	-5V max,
	Switching speed
Power requirements	+5.0 volts: approx. 250 mA
	+5.0 volts: approx. 250 mA
Temperature:	operating 0° to 70°
	storage -50° to 80°
Humidity:	10% to 90%

35	DSCLP/SSCLP-100 User's Manual

Image 35

Contents DSCLP/SSCLP-100 Warranty Information Page Declaration of Conformity Enhanced Serial Adapter Identification Windows ConfigurationsAddress Map and Special Registers Base Address and Interrupt Level IRQGeneral Information Enable Scratchpad Register SPAD, J2 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Jumper/connector locations Hardware InstallationPort Address Range Interrupt Status Register Enabling the Special RegistersBit Name Description Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows Windows Windows Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page Dual-Port RS-232 Serial Adapter Page Page For legacy applicattions which cannot Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal SSCLP-100 PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingDSCLP/SSCLP-100