Patton electronic Model 3101RC manual FTP Get In Progress, Firmware update no action

Page 36

Model 3101RC Getting Started Guide	3 • Configuration

Web GUI

On the menu tree, click on Maintenance > Firmware Update. The Firmware Update page is displayed. Once you have entered all the necessary values, click on the Firmware Update button to start updating the ﬁrmware.

Figure 33. Firmware update no action

Enter the following parameters:

•Firmware Update: Once you have typed in the parameter values, click on this button to start ﬁrmware update.

•Remote FTP Server IP: Type in the IP address of the FTP server.

•Server User Name: Type in the ftp user name.

•Server Password: Type in the ftp password.

•File Name: Type in the ﬁrmware ﬁlename.

•Firmware Update Status: This ﬁeld shows current status of ﬁrmware update process.

•Firmware Partition Select: Choose a ﬁrmware memory partition (Partition 1 or 2). If you change to the other partition (not current partition), the system will restart immediately.

FTP Get In Progress

The following message is displayed during getting ﬁle from FTP server.

Firmware Update

36

Image 36

Contents ADSL2/2+ Triple-Play Access Ipdslam Module Mailsupport@patton.com Summary Table of Contents Table of Contents Compliance information List of Figures List of Tables About this guide AudienceStructure Precautions Safety when working with electricityTypographical conventions used in this document General conventionsMouse conventions Chapter contents Model 3101RC OverviewModel 3101RC ADSL2/2+ Triple-play Access Ipdslam Module IntroductionFeatures ApplicationsHardware Installation Pre-Installation Safety RequirementTools and Test Equipment Requirements Electrostatic Discharge ProtectionHardware Installation Connecting the ADSLx interfacesConnecting the GBE trunk interface RJ-45 Electrical Trunk PortEthernet Port 10/100 Enet on Trunk Card Ethernet Port RJ-45 pin assignmentConsole Port Config TxDConﬁguration Provisioning a Management IP Port CLIConﬁgure Model 3101RC Getting Started Guide3 Configuration Web GUIIP Routes Conﬁguration Import/Export ExampleExport export ﬁle from Running conﬁg to the Tftp server Import File Write Download Conﬁg To Flash Database conﬁguration menuin the Web GUIWrite downloaded Conﬁg to Flash in progress Import File Load Remote Conﬁg to Running Conﬁg Load Remote Conﬁg to Running Conﬁg Get FileExport File Put Running Conﬁg to Remote Tftp Server Put Running Conﬁg to Remote Tftp Server Put FileSave Running Conﬁg to Flash System Conﬁg Save Running Conﬁg to Flash Write Running ConﬁgurationReload Flash to Running Conﬁg Load Flash to Running Conﬁg Load ConﬁgurationRestore Factory Default Restore Factory DefaultFlash Boot Point Conﬁguration Select Flash Boot Point Conﬁguration SelectFirmware Update ﬁrmware login 172.16.100.41 usernameFirmware update no action FTP Get In ProgressFirmware Write In Progress Firmware Write SuccessfulOperation Maintenance Requirement Dispatching Maintenance PersonnelRoutine Maintenance Tools and Equipment RequirementsControls and LED Indication 3101RC LEDsConfig 3101TM LEDs TM Controls and LED IndicationContacting Patton for assistance Warranty coverage Out-of-warranty serviceContact information Returns for creditReturn for credit policy RMA numbersShipping instructions Appendix a Compliance information Safety Compliance ComplianceCE Declaration of Conformity EMC Compliance