Patton electronic 2616RC user manual Precautions, Safety when working with electricity

Page 11

Model 2616RC T-DAC User Manual	About this guide

Precautions

Notes and cautions, which have the following meanings, are used throughout this guide to help you become aware of potential T-DAC problems. Warnings relate to personal injury issues, and Cautions refer to potential property damage.

Note

WARNING

WARNING

CAUTION

CAUTION

Calls attention to important information.

The shock hazard symbol and WARNING heading indicate a potential electric shock hazard. Strictly follow the warning instructions to avoid injury caused by electric shock.

The alert symbol and WARNING heading indicate a potential safety hazard. Strictly follow the warning instructions to avoid personal injury.

The shock hazard symbol and CAUTION heading indicate a potential electric shock hazard. Strictly follow the instructions to avoid property damage caused by electric shock.

The alert symbol and CAUTION heading indicate a potential haz- ard. Strictly follow the instructions to avoid property damage.

Safety when working with electricity

WARNING

•The Model 2616RC shall be installed in a restricted access location accessi- ble only to authorized personnel.

• This unit contains no user-serviceable parts. Refer servicing to qualified personnel.

•When removing cards from a shelf under power, some of the components such as the DC converters may be extremely hot. Handle by the card guides only.

•To prevent accidental electrical short circuits, align the card correctly between the card guides before you insert it in the slot.

In accordance with the requirements of council directive 2002/ 96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE collection system in your country for recycling.

11

Image 11

Contents T1/E1 TDM-Digital Access Concentrator T-DAC Patton Electronics Company, Inc Summary Table of Contents Contents Operation and shutdown Compliance information List of Figures Model 2960 RAS Getting Started Guide List of Tables Structure About this guideAudience Safety when working with electricity PrecautionsMouse conventions Typographical conventions used in this documentGeneral conventions Introduction Chapter contentsModel 2616RC T-DAC Model 2616RC T1/E1 T-DAC overviewWAN Hardware overviewManagement services Power systemTemperature Physical dimensionsMIB LED LED displayHardware installation Unpacking the Model 2616RC T-DAC DAC blades installationIntroduction Alignment/ESD pin and card handle Connecting the Ethernet ports Cable installationDB-9-to-RJ-45 cable diagram Pin Scsi to 8 RJ-45 connectors cable Connecting the T1/E1 WAN portsWAN cable‘s 68-pin Scsi connector SCSI-to-open-end WAN cable Pin Scsi to open end cableWAN cable’s 68 non-terminated twisted-pairs Punch-down block wiring Installing the WAN cable to a punch-down blockPin Scsi to 64-pin female Telco 10-3096TM68/64-6 Pin Scsi to open end, 6 foot cable 10-3096TM68-6-ObsoleteCompleting the hardware installation Configuring the T-DAC for operation Configuration prerequisites Connecting the DB9-RJ45 adapter with the included cable Initial configuration through the RS-232 control portConnection Description window Setting up the HyperTerminal or similar program sessionConfigure your COM port settings as shown in , then click OK Login window Ethernet configuration window Using a browser to complete Model 2616RC configurationHome page overview Displaying the T-DAC 2616RC web administration pagesHome page window panes Flash Configuring the default gatewayExample Configuring the system clocking parametersSystem Clocking Configuration page, example For Clock Reference select secondary2 or slave3 DS0 Mapping Overview window Configuring the DS0 mappingExamples for configuring static connections Accessing the Line Interface Settings Configuring line settings and signaling for E1T1/E1 Link Activity Ports 1 4 Configuring the E1 line interface settingsFrom the Line Build Out pull-down menu select e1pulse1 E1 Alarms Present indicator Configuring line settings and signaling for T1Line Type pull-down menu with dsx1ESF2 selected Configuring the T1 line settingsFrom the Line Build Out pull-down menu select t1pulse0dB1 Alarm Card Information window Enabling/disabling the alarm cardBacking up your configuration parameters Saving your configurationIMPORT/EXPORT Backing up the configuration store in flash memory Completing the installation Configuring the T-DAC for operation Operation and shutdown De-activating the Model 2616RC Activating the Model 2616RCTroubleshooting and maintenance Cited in De-activating the Model 2616RC on Power Fault analysisSystem DSX1 payload loop dsx1PayloadLoop T1/E1 port test modesLine Loop DSX1 line loop dsxLineLoopCalibration Periodic maintenanceMaintenance Exporting the current Model 2616RC configurationMaintenance Troubleshooting and maintenance Removing the defective Model 2616RC Importing a saved configuration Installing the replacement Model 2616RCCompleting the installation Contacting Patton for assistance Returns for credit Warranty coverageOut-of-warranty service Contact informationShipping instructions Return for credit policyRMA numbers EMC Appendix a Compliance informationIndustry Canada Notice SafetyCompliance Radio and TV InterferenceAuthorized European Representative FCC Part 68 Acta StatementCE Declaration of Conformity Introduction Not Used Introduction

Related manuals

Manual 2 pages 12.27 Kb